WI/MN/IA GTG March 13th 2010

[nikocker]

Well Pay attention!!!

Looks like i am going to have to quit chasing them coyotes and play on the puter more......

Page 7 and this is the first I saw the news.

You can plan on 1/3 showing up, I will have to check with Glenn to see if he can make it.

Looks like this should be a good turn out again, thanks J.D. and Johnny for putting up with all of us again.

Good you saw this - - - make sure you bring some more Orange reinforcements . . . me thinks we're headed into the DOLLY camp again!!

Al

 

[nikocker]

CoolI can't wait to see the difference between your 372XP,NE346XP (stock) and my ported 371XP,NE346XP.I will be redoig my muffler on the 371XP,going to weld up the stock port and take off the 288 deflector Brad put on for the second port and weld one big straight pipe on where the scond port was:jawdrop:should at least be real loud.

Should be fun Woodyman!!

Al

 

[grandpatractor]

update

I think this is the list so far.
If I missed you or have you in the wrong category just holler at me and I will fix it.

Planning on attending 29

Grandpatractor
Heavy Fuel
wi50
redlinefever
wdchuck
nikocker
Curlycherry1
Thorcw
triptester
manyhobies
wendell
heimannm
Steve NW WI
wetgunpowder
GrizzlyAdams86
kevin j
JeepNJesse
McManus
Philbert
Johnzski
woodyman
davec
VINIFIREWOOD
isaaccarlson
04ultra's saws
turbo +some
rbmopar
shwinecat
valekbrothers
razafy

Maybe Attending 4

jtimm
loosenuts
04ultra
stihlcrazy20

 

[grandpatractor]

My dad and I will be attending the March 13th event. Thanks.

Hey, welcome to the site.
Glad you and your dad can make it.

 

[woodyman]

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/IrBCj9ZrmxQ&hl=en_US&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/IrBCj9ZrmxQ&hl=en_US&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object> Just trying to get this video thing straightened out,I think I have it.I took this yesterday,I was going to make a whole vid but the starter rope broke so not much of a video.You can see when the video starts the starter handle is on the saw and then its not when I put it back down(it happens).This looks like it is working so I should have a video of Thor felling a large red oak Sat.

 

[WetGunPowder]

I am bringing me,my saws,brats with buns,snacks,pop or soda (depending on which part of the country you are from) and a different altitude toward the Dolmar line of saws.

DIFFERENT ALTITUDE? Does that mean your high on DOLMARS?

 

[Eddie39]

Fellas you dont know how lucky you are having meets and events like this to go to i only wish i could be there infact i only wish there was events like this
over here where i live it would be great well i think so but her indoors would tell you a different story hope its a good one .

 

[redlinefever]

plane tickets are cheap eddie it just a 8.5 hour drive for me !!!!!!!!!!!!

 

[HEAVY FUEL]

shweet!!
It will be good to have you again!

Nice Avatar GPT, at first when I saw the sparks I thought it was WGP running a 5100 into the gravel again. And no, that back tire doesn't make your butt look big.

 

[woodyman]

DIFFERENT ALTITUDE? Does that mean your high on DOLMARS?

It could be my altitude after running my 371 up against Thor's 7900:hmm3grin2orange:

 

[grandpatractor]

It could be my altitude after running my 371 up against Thor's 7900:hmm3grin2orange:

If you need any tips on fixing recoils, I hear that wdchuck is pretty good at them.:hmm3grin2orange::hmm3grin2orange::hmm3grin2orange:

 

[HEAVY FUEL]

so who's bringing what???????????? just curious

I keep buyin coors light for the GTG- But they keep dissappearing!:monkey:

 

[wendell]

I'm bringing my saws, a bottle of scotch and my winning personality.

 

[woodyman]

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/SnzRrlZTqWA&hl=en_US&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/SnzRrlZTqWA&hl=en_US&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object> Got this one of the 5100(might need to get the chain sharper) I took it yesterday,it uploaded but I can't get the one of Thor to upload

 

[wendell]

might need to get the chain sharpened? :hmm3grin2orange:

 

[grandpatractor]

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/SnzRrlZTqWA&hl=en_US&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/SnzRrlZTqWA&hl=en_US&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object> Got this one of the 5100(might need to get the chain sharper) I took it yesterday,it uploaded but I can't get the one of Thor to upload

I can sharpen that for ya while wdchuck fixes the recoil on the 371.

 

[isaaccarlson]

I'll be bringing my MS390.

Maybe I can get some fuel safe gasket maker from someone?......so I can put it back together after I port it.

 

[woodyman]

If you need any tips on fixing recoils, I hear that wdchuck is pretty good at them.:hmm3grin2orange::hmm3grin2orange::hmm3grin2orange:

Yeah but mine is not a Stihl 028It has a new rope on it now and it is a little longer than before the mishap.

 

[woodyman]

Maybe I can get some fuel safe gasket maker from someone?......so I can put it back together after I port it.

I would like to see that cylinder after you port it.What kind of tool do you use to get up in there to chamfer the inside edges of the ports.

 

[isaaccarlson]

Will probably have to make one....Fine sand paper on a

long rod. I don't care if it takes a little time. If it looks too hard to chamfer then it will stay the way it is.