WI/MN/IA GTG March 13th 2010

[woodyman]

That is for sure. Thanks again JD for your great hospitality!!

I didn't take many pictures are there seemed to be almost as many cameras as saws but here's another of the saws that were there.



and here are our timekeepers

and here is how we started our day, filing up the dump truck for the Interfaith Caregivers.



Great to meet you all. I can't wait for the net one!!

I thought those two girls were the Dolmar cheer lead'en squad:hmm3grin2orange:

 

[woodyman]

Yeah the 7900 had timing issue we think havent got into it yet to see!!so it will run much better one we figuire it out

I thought it sounded sweet,not quite right on but I think any saw with a pipe sounds sweet

 

[HEAVY FUEL]

There never was a 2194, just 2094 and 2095 - and they weren't red versions of any Husky.

You are all right. It is a 2095 with a 2094 recoil & a few other parts, some how those recoils don't hold up to long. It's had a rough life.

 

[HuskyMurph]

you remember how to tune em now? It does not hurt to practice every once in a while.

yeah but i will need to practice

 

[blsnelling]

<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/VkXqLbbeJH8&hl=en_US&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/VkXqLbbeJH8&hl=en_US&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object> grampatractor with a very loud and very modded 026 belonging to redlinefeverA few more vids left,but I am done for tonight.

How'd your 346 do against this 026?

 

[grandpatractor]

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/G-y1b8AC6XQ&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/G-y1b8AC6XQ&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object> I think this is treemonkey running one of his Stihls with a pipe:jawdrop:

And that is OAK!!:jawdrop:

 

[woodyman]

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/nOgWnKEyP6A&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/nOgWnKEyP6A&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object> Sorry I forgot alot of names.Nice running Stihl

 

[woodyman]

How'd your 346 do against this 026?

I don't want to talk about it.My 346 was not even close to the same class as redlinefevers tricked out 026grampatractor would know the times though.

 

[grandpatractor]

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/nOgWnKEyP6A&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/nOgWnKEyP6A&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object> Sorry I forgot alot of names.Nice running Stihl

I think that is Bob with an 028 that has been monkeyed with.:monkey:

 

[SawTroll]

How'd your 346 do against this 026?

I have absolutely no faith in GTG comparisons - too many variables usually are involved!

 

[grandpatractor]

How'd your 346 do against this 026?

I don't want to talk about it.My 346 was not even close to the same class as redlinefevers tricked out 026grampatractor would know the times though.

Ya that 026 was in a class by itself.
Redlinefever did a heck of a job with it.

 

[woodyman]

<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/nhDy2kbHQqg&hl=en_US&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/nhDy2kbHQqg&hl=en_US&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object> Mark with another old Mac.Manyhobbies looked to be very interested in something Mark was doing.At first I thought it was Thor looking for a big cookie

 

[Thorcw]

Mark with another old Mac.Manyhobbies looked to be very interested in something Mark was doing.At first I thought it was Thor looking for a big cookie

You are just unrelenting

 

[SawTroll]

<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/nhDy2kbHQqg&hl=en_US&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/nhDy2kbHQqg&hl=en_US&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object> Mark with another old Mac.Manyhobbies looked to be very interested in something Mark was doing.At first I thought it was Thor looking for a big cookie

Mark is cool, and a very good guy!

 

[wendell]

I have absolutely no faith in GTG comparisons - too many variables usually are involved!

:agree2:

Or, at least it explains why I didn't do better.

 

[Work Saw Collector]

Yup, I'm easily distracted!!! My new 420 (thanks Jazz3ring!) might never get used by me again, my buddy's wife got a hold of it today and won't give it back LOL!

There's a hundred plus pictures here: Steve's Pics.

I'll get a few videos uploaded tomorrow after work. Thanks for your patience!

I couldn't get it to insert dosn't work like flickr.
I like this one. Saw in mud print.

http://picasaweb.google.com/SteveInNWWI/100KZ650#5448688658962809682

Nice bunch of pics.

 

[redlinefever]

Thanksfor all the comments guys!!!!!!!!! This saw has quite a bit left in it also It was running stock almost brand new chain round ground and a 7 pin sprocket now I have a diffrent bar and chain and going to a 8 . When u seen me cut in the video with it that was the third set of three cuts that i had done with the saw so still gettin used to it and where the rpm band is as u could tell in the video!!!!!!We all had a great time from my group!!!!

 

[woodyman]

<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/tP2b2LmNwZ0&hl=en_US&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/tP2b2LmNwZ0&hl=en_US&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object> Looks like redlinefever with a stihl.Don't know which Stihl,they all look small when Ryan is holding them:jawdrop: This is the last vid I have

 

[redlinefever]

woodyman thats bob the guy that was with treemonkey(scott).They have alot of time into that 280

 

[Steve NW WI]

I couldn't get it to insert dosn't work like flickr.
I like this one. Saw in mud print.

http://picasaweb.google.com/SteveInNWWI/100KZ650#5448688658962809682

Nice bunch of pics.

Yep, I was gonna see how sharp some of the saw nuts on here are. I know what saw made that print, as do some of the others at the GTG - let's see if anyone can guess what saw made that print (You guys that already know, hold off for a while so we can see what everyone's made of)

Here's the pic: