your favorite saw!

[REJ2]

Favorite? I change my mind each time I'm asked!! All of them!! REJ2

 

[wigglesworth]

Yep, sure is. I put a new OEM P&C that I did a good woods port on and dropped the squish, modded the muffler and it has become my favorite, even over my 044`s but it might just because I just built it, you know how that is. LOL
Pioneerguy600

Yep. My back sure likes them 044's better, but the 038 mag is one tough bird. They really wake up with a few mod's as well.

 

[woodyman]

My fovorite to cut with was my Husky 266SE that I used for 20 some odd years and a pic for wigglesworth of the 044 I put a B/B kit in and sold without putting it in any wood,it was my favorite to work on.

 

[robfromaz1977]

I'm kinda partial to this one but like my 266 SE's as well.

 

[AUSSIE1]

Fave saw again? Sure it was only last week! Oh well..

My ported big bore 371XP... or is it the ported 385XP... but then I couldn't part with ported big bore 395XP...

 

[MS460WOODCHUCK]

As far as the newer saws it would have to be the 1st STIHL that I ever bought, my MS460!
<a href="http://s493.photobucket.com/albums/rr293/ms460woodchuck/?action=view&current=cuttingwood015.jpg" target="_blank"><img src="http://i493.photobucket.com/albums/rr293/ms460woodchuck/cuttingwood015.jpg" border="0" alt="Photobucket"></a>
I won't even get started on the older saw's LOL.:help:

 

[jimdad07]

This one to look at:

This one to run:

 

[Stihlman441]

I think my faverate is the 880 with the 50'' bar

But i still love the rest of the family

 

[DroppedP51]

This is a good saw,the more im using it the better it gets

 

[madhatte]

This 'un, I reckon. It's a hoot to run.

 

[RandyMac]

 

[272super]

I'll go with the 266SE. There's just something about it. It never backs down from anything.

 

[jmethodrose]

of the running saws I have at the moment, my almost new 346 is a joy to run...

http://picasaweb.google.com/lh/photo/PgVNal1ZyO-AmtNLe12g3Q?feat=directlink

but there is still a special place in my heart for my first Husky, a 365. Dead at the moment, but I'm planning to 372ify it as soon as possible!

http://picasaweb.google.com/lh/photo/y_WgiFwVyN25azRvO5fP_w?feat=directlink


I don't know how to resize photos so they'll upload to this site, so you'll have to follow the links!

cheers,
Joe

 

[Mad Professor]

This one as I luv 036s, light powerful and nimble.

I got this saw FREE. Put in OEM piston kit, seals, clutch upgrade, all hoses, carb kit, and B/C

$230 invested w/new ES bar and RSC chain

036 rebuild cost

Item Source Cost ($)
Seized saw friend free
OEM piston /rings Ebay 45
Piston pin Dealer 14
circlips Dealer 1.40
Gasket set Dealer 13.75
Clutch upgrade Dealer 30
Muffler paint Hardware store 5
Sandpaper detergent Hardware store 10
Fuel line Dealer 9.50
Carb kit Dealer 11
Impulse line Dealer 4
Upper bearing Dealer 9
Spark plug 3.25
Oil pump line kit Dealer 5
20” RSC chain ebay 15
20” ES bar ebay 53

 

[Meadow Beaver]

I think it would be the new 390. Before that it was the 372xpw.

You still have the 390?

 

[blsnelling]

I have two.

MS440, ported Mahle 460 P&C, dual port muffler, 28" reduced weight bar.

 

[Guido Salvage]

I own a lot of saws including Stihl, Husqvarna, Homelite, McCulloch, Poulan, etc. But I think that my vote will go to my original Poulan 3400, the first saw I bought new over 25 years ago. It is currently torn down due to a broken ring, I hope to have it back together soon.