There are two situations where good penetration is key, welding and sex
I know all about one of those!
There are two situations where good penetration is key, welding and sex
Oh you're a welder huh!I know all about one of those!
110 welder in the hands of a really good expert and help from a torch in the form of a good preheat can do a lot. But why?? Bevel it, if it's cold give it at least a mild preheat and burn in some 6010 Dc or 6011 ac on the root pass and then 7018 (make sure rod is hot and dry) cap or if your not that great of welder some 7014 rod especially on an AC welder.
WTF is 4x6 sch 80? you guys use square/rectangular tube for plumbing in WI? also with seeing your vertical up "welds" if you want to call it that, you're way to hot on the vertical, turn it down and look up how to weave for vert up. or you could just run down, its nowhere near as strong as vertical up, but its easy and its better than what's there now...There was around 250 cord through it before this destructed. The square tube behind acting as a spreader litterly tore partially off no cold weld there. The beam is 2 - 4"x6"x schedule 80 tubes with a 3/8x8" plate on top plate all welded together, beam ok. I could run a 1/2" bar by x depth up from the center of the tubes welded to the 2 inside walls If I have a piece long enough ( I hate trying to weld vertically as I am terrible at that) Course if I think a bit about it, putting a slot in the spreader tube would allow for a way to add a set of 4 way wings- pin in position from inside tube or adjustabe height sliding in tube, backed up by the strengthening rib. Might just work for the straight grained stuff or some sort of slide on or bolt on assembly. That's all got wait a bit though- other items ahead in priority right now. Now ya done it got me looking at mods before I even get fixed.
I know all about one of those!
Oh you're a welder huh!
lol! Well, you being a newbie to AS, you probably don't know my 'reputation' yet. I'll just give you a link to another thread and you can figure it out for yourself.
http://www.arboristsite.com/community/threads/uncles-baby-raffle.263374/
Oh man!! I guess you do have a little experience. I bow down to your fertileness!!!! 9 kids?! You sir are one virile SOB!
Hahaha yes I guess you did. I've got two daughters age 13, and 9. Raising those two by myself is definitely a challenge, I don't think I could handle 9.Fixed it for ya.
Enter your email address to join: