Mastermind Worksaws Finally Gets More Help

[Duane(Pa)]

I'm tired, and out of daylight.......

You are sumthin' else

 

[fordf150]

Awesome. Baler build thread!

 

[Mastermind]

The guide on the pickup side was broken, caught the plunger, and sheared the pin. I reckon that's why Anita parked it to begin with. So far, that is the only thing I've found wrong with it.

I mean besides the car smashing into it.

 

[weedkilla]

Make sure you get a video of it stock - otherwise we'll doubt your claims of all the extra bananas after you port it.

 

[Mastermind]

I wish I had a thrower for it.

 

[weedkilla]

Carting hay builds character.

Salt tablets help with the cramps!

 

[dolmarkid]

Are yo gonna port it

 

[Guido Salvage]

I wish I had a thrower for it.

Thrower? Why not go with a New Holland bale stacker?

 

[Bilge Rat LT 20]

All farm projects require a torch and welder.
Looks like you have everything covered except you need a bigger hammer.

In years past farmers just piled the hay into large stacks, no baler to run, fix and cuss.

 

[Gypo Logger]

I thought Jon is just another chip off the ole block and is happy and proud to be with the ole Dad.

 

[Paragon Builder]

I wish I had a thrower for it.

I used to be a thrower....

 

[fordf150]

In years past farmers just piled the hay into large stacks, no baler to run, fix and cuss.

our barn still has the track, trolley, fork. plus we hung up the old hay sweep up on the end of the barn. still have the buck rake sitting in the field too.

 

[Magnum783]

I wish I had a thrower for it.

No you don't!!!! They can take a good bale and trash it if they are not set correctly. Man I used to hate working on throwers.

 

[Mastermind]

We have the plunger out of it right now.......gonna replace the lower right hand slide.

 

[Mastermind]

"The Bubba" LLC scraping the bale chamber.........

 

[Paragon Builder]

Nice to have a little guy around!

 

[Duane(Pa)]

It's about time Bubba gets some press in his own thread..... Fine looking young man!!! I think you are really going to like that 311

 

[Magnum783]

If I crawled in there it would take a winch to get out. Super handy to have the little guy to fit those spots.

 

[Guido Salvage]

"The Bubba" LLC scraping the bale chamber.........

View attachment 428195 View attachment 428196 View attachment 428197

For Bubba's sake I hope the PTO shaft is disconnected...

 

[Mastermind]

For Bubba's sake I hope the PTO shaft is disconnected...

Well, the needles are not installed, and the plunger is on the ground behind the baler.........there's not much that could hurt him in there now.