Is that a Lil top handle I see in the back
Nik's Poulan Thread
- Thread starter FATGUY
- Start date
Help Support Arborist Forum:
Ambull01
Addicted to ArboristSite
I wouldn't be able to tell which saws are fixable and what are parts saws at best. Where in MD are you?
Ambull01
Addicted to ArboristSite
Just moved from that area. There's a bunch of us MDers on this site.
redunshee
Addicted to ArboristSite
Well my PP405 has developed another issue. Fixed reed valve assembly leak but saw wouldn't start. Looked at carb and it was very oiley. Peaked in fuel tank and saw a small oil slick. Apparently bar oil is seeping in. Does the case gasket seperate the fuel and oil tanks? If so I imagine I will need to replace the gasket by splitting the case. That likely means making a new gasket. Is my diagnosis correct?
Bob
Bob
Guido Salvage
Supreme Saw Whoreder
Is that a Lil top handle I see in the back
I left all the top handles behind... If you mean the yellow saw in the upper left, I believe that is an Echo rebadged as a John Deere 50V.
That's the one, brother had one he bought new, gave it away 2 years ago to a guy that needed one.
Sent from my Prism II from T-Mobile's slow edge network :-(
Sent from my Prism II from T-Mobile's slow edge network :-(
blk05crew
I like 'em green
That looks like a nice little haul you made Guido. The 4900 in decent shape?
Bob,
I believe there is a divider between the tanks that sometimes falls out. I think most guys just JB Weld them back in place. The Pioneer guys would be able to tell you for sure. I am sure you will have to split the case.
Did you get the service manual for that series? If so, look at page 50-5. I think you can see the plate in the photo's
Make sure you measure the location on the crank snout of the oil pump worm gear before you pull it off.
Guido Salvage
Supreme Saw Whoreder
Don't know yet, I hurriedly unloaded them and stashed them away before my wife got home. I plan to pull them out tomorrow to see what I have. The good news is I got another 4900 in the haul from the closed dealer in March so I can hopefully make one.
blk05crew
I like 'em green
Nice, well like you said hopefully you'll have at least one good one out of the 2 plus spare parts.
blk05crew
I like 'em green
Anyone near Chicago, here's a pretty nice 245A on CL for $50. http://chicago.craigslist.org/wcl/tls/4796648854.html
Ambull01
Addicted to ArboristSite
Is there something special about a 4900?
Guido Salvage
Supreme Saw Whoreder
all big Poulan countervibes from the 4200 on up are special. Old school reed valve grunt with good AV. You would have to spend $800 or more to match the performance with a modern saw. And the new saw won't sound as good.
Oh, not really, I collect them for the hell of it...
blk05crew
I like 'em green
Carb kit came yesterday for one of my 5200's, hopefully going to install it tonight. Anybody wear rubber gloves when working on carbs just to make sure the carb stays clean?
I always clean the carb well externally before it even comes off of the saw. Nothing worse then a nugget of crap falling into the intake and then tumble into the cylinder. Just lay out a clean towel, use a clean pick when setting the spring and make sure all cleaner (organic solvents) have evaporated out of the carb if those new diaphragms are not going to see fuel immediately. Gloves are nice if your fingers are cracked/cut open especially when acetone or other solvents in carb cleaner find their way into those cracks. Acetone and toluene in a cut will demand your full attention!
You might even find yourself cussing.
You might even find yourself cussing.
Bar on the Dayton/361 any count?
Found a Remy roller nose in my pile for the evilbay Dayton/245.
Ambull01
Addicted to ArboristSite
Nice! Man I would love to see them in my shed every time I walk in. I covet the saw in the middle with the huge bow bar or whatever it's called. Saw looks manly.
