Swap meet...

Treestuff
Rugged made
shop deals on amazon
Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Stihl 019t

I have a good running 019t with a 12" bar. Everything works as it should. I have this listed for sale on here, but I thought I would list it here and maybe just trade for something. Looking for just about anything "orange" or large mount bars,,,size????. If you have something interesting, let me know.


attachment.php


attachment.php
 
StihlGuitar said:
I've got lots of 026 parts.
Click to expand...

Do you have an 026 carb with high and low speed adjustments? Looking at the IPL only one out of six of the carbs they used has the low speed adjusment and that's the one i got. Was thinking of opening up the exhaust a bit but can't adjust for it with the carb I got.
 
cleaf30 said:
Do you have an 026 carb with high and low speed adjustments? Looking at the IPL only one out of six of the carbs they used has the low speed adjusment and that's the one i got. Was thinking of opening up the exhaust a bit but can't adjust for it with the carb I got.
Click to expand...

I'll look. You should throw an 044 carb on it and make it scream. I've got a couple 044 carbs.
 
I have these parts to a 056AVSEQ. All of these parts are good. The piston and cylinder are in very good shape and the cylinder says mahle on it. The bucking spike is the inner spike. PM me if interested.
<a href="http://s493.photobucket.com/albums/rr293/ms460woodchuck/?action=view&current=saws048.jpg" target="_blank"><img src="http://i493.photobucket.com/albums/rr293/ms460woodchuck/saws048.jpg" border="0" alt="Photobucket"></a>
 
ms460woodchuck said:
I have 3 bars to deal. The first one is a Stihl ES 36'' 404' for a 088/880 with only 3 tanks of fuel ran with it, it comes with 2 chains, both chains are woodland pro full chisel the full comp has been sharpened with a file 1 time and the skip has never even been on a saw. The second bar is the original 41'' .404 to a 088 with a stihl full chisel that has never been sharpened. The sprocket tip on the 41'' is just a little loose not bad though I would run it with no worries. The third bar is a 42'' windsor duratip (hardnose) for a poulan 5400, pp505 and I think it will fit huskies too. The code on it is 42HU63 this bar has only had one tank of fuel ran with it and the full chisel stihl chain. Most of the red paint being off is from cleaning it with carb cleaner.
<a href="http://s493.photobucket.com/albums/rr293/ms460woodchuck/?action=view&current=saws044.jpg" target="_blank"><img src="http://i493.photobucket.com/albums/rr293/ms460woodchuck/saws044.jpg" border="0" alt="Photobucket"></a>
Click to expand...

I still have this 36'' ES bar and 2 chains if anyone is interested.
 
056 SEM flywheel

I've got the SEM ignition module, just need a flywheel to go with it!
Have many 056 parts to trade (except ignition of course), some S10 parts, a nearly complete 041. Or I'll pay cash.
 
I have a weak running low comp mac 200 . I`d like to trade for a large working bar/chain combo for my Stihl 660 or a replacement saw for my Poulan lol thanks Mark
 
valekbrothers said:
I have a good running 019t with a 12" bar. Everything works as it should. I have this listed for sale on here, but I thought I would list it here and maybe just trade for something. Looking for just about anything "orange" or large mount bars,,,size????. If you have something interesting, let me know.


attachment.php


attachment.php
Click to expand...

Sold!
 

Similar threads

J
Farmertec Warning
4 5 6
Replies
111
Views
6K
Ed Penney
Ed Penney
V
Lots of Questions about Axe Hanging
Replies
3
Views
1K
thomasinvancouver
T
J
Hello!
Replies
9
Views
1K
jackrabbit
J
HumBurner
Sold 181/281 Parts Saws and various NEW parts
2 3
Replies
44
Views
5K
davidwyby
davidwyby
Whiskey_Bravo
What tests would you want to see on a battery powered top handle saw?
2
Replies
33
Views
3K
Dcsco
D

Latest posts

Back
Top