Swap meet...
- Thread starter Four Paws
- Start date
Help Support Arborist Forum:
HittinSteel
Addicted to ArboristSite
yeah, glad the bastid finally found some decent equipment of his own...after he finished cuttin' with my clean 272xp, the DROOL was TOUGH to clean off!! LOL!
may be a silly question, but you don't have workin' chainbrake parts do ya?? not sure what it needs yet..
thanks Bry...
J
Well, the cover is broken but the brake might still be functional. It's the metal style......
smilin possum
Addicted to ArboristSite
Hey ya'll I just whooped him just for giggles to make him get more saws. Need to see that saw list grow some more. You won't be sorry. When you hit 100 you can spend some time trying to figure out HOW TO STOP.
smilin possum
Addicted to ArboristSite
I'm in need of a longer bar for a DA-211 Mercury there has to be one out there somewhere.
o8f150
Tree Freak
solo 603 fuel line
since dhibbs75 doesn't have much time to get on here so i am posting this for him,,,plus since we both use the saw,,,,anyway we need the fuel line that goes in the tank,,it has the grommet at the end of the line that fits in the wall of the tank,,,i know there is a specific name for this,,but you all know what i need,,,let me know if have 1 and how much,,,
thanks guys
since dhibbs75 doesn't have much time to get on here so i am posting this for him,,,plus since we both use the saw,,,,anyway we need the fuel line that goes in the tank,,it has the grommet at the end of the line that fits in the wall of the tank,,,i know there is a specific name for this,,but you all know what i need,,,let me know if have 1 and how much,,,
thanks guys
Duke Thieroff
Fill your hands, you SOB!
Up for trade....Poulan Pro 4620AVX, yes the one with the chain adjuster. Looking for older saws in trade for it. Won't take much to get this thing gone. Not really interested in newer saws unless of better build quality.
This saw is basically like new, maybe 3 hours on it, could benefit from some carb adjustment/limiter caps and muffler mod, throw a smaller bar on it and would be a great loaner/limber/light duty saw. Pulls 160+compression.
CT
This saw is basically like new, maybe 3 hours on it, could benefit from some carb adjustment/limiter caps and muffler mod, throw a smaller bar on it and would be a great loaner/limber/light duty saw. Pulls 160+compression.
CT
SawGarage
Addicted to ArboristSite
It appears you have spent too much time on here Jay.
LOL!!! naw man...wealth of info, and good people!!...maybe long enough to see value in junk, and NONE in CAD
might be a record! lolIt's all about having AWESOME friends!!
There ya go, man...I fixed it for ya!!
can ya email me a pic? I'll have tp see what's up next time we get together
J
roncoinc
Official Stihl Disser
Great site, i'm trying not to get addicted. I have that problem.
I don't want to end up like Jay.
You the guy over in "machvegas" NH ?
want some saw projects ? :greenchainsaw:
SawGarage
Addicted to ArboristSite
Ron...
be gentle on the noobs!
Yes, that would be me. I'm almost scared to ask
UUUHHHHH OHHHHH...
looks like Ron got to you ALREADY! lol.
I'm not going (and really can't, he;s a good guy, super helpful, knowledgeable,) say anythng BAD about Ron.... although he does Fart dust, so, ModifiedMark's told me....
:jester:BUT...look @ his sig, and some of his posts!
:spam:StayFAR AWAY!!! (unless your picking up my stuff waiting for me! lol)
Scooterbum
Addicted to ArboristSite
Duke Thieroff
Fill your hands, you SOB!
Not really sure, just really looking to see what people want to offer it.
Bigger bore saws are more interesting to me than this one, for sure.
Something older, less plastic.
Did you get those parts Steve?
CT
SawGarage
Addicted to ArboristSite
Poulan/ little j-red parts
I need this part for a Poulan (221 if that matters..) preferably in LESS pieces than this one.
saw pulls 170 psi...only reason I'm fixin.
this is the carb mounting block,
Part # 520 04 97 00
I seem to remember someone having some blown up saws and was sending MAstermind (Randy) a crank? maybe this part is the same?
also need a clutch cover for a 2036 Jonsered
thanks!
J
I need this part for a Poulan (221 if that matters..) preferably in LESS pieces than this one.
saw pulls 170 psi...only reason I'm fixin.
this is the carb mounting block,
Part # 520 04 97 00
I seem to remember someone having some blown up saws and was sending MAstermind (Randy) a crank?
maybe this part is the same?also need a clutch cover for a 2036 Jonsered
thanks!
J
Scooterbum
Addicted to ArboristSite
Mastermind
Work Saw Specialist
The crank I got came from a strato version of those saws. I think I have one of those for you J. I have to take off in about an hour, so I'll let you know tomorrow for sure.
Mastermind
Work Saw Specialist
I went ahead and looked through my poulan box. The one I have is the older style, but it will work. They changed to the hard black ones to help the screws stay tight, I think. 
SawGarage
Addicted to ArboristSite
yeah, this was BEFORE I had the stuff to cut my own gaskets...and you KNOW what the cyl to manifold gasket is like
so, like a TARD, I HAM-fisted it....$^%**&^%$# :bang:
J
upstateny
ArboristSite Operative
I'm looking for a 22"-28" bar (Windsor/Oregon/Total preferred) for Large Mount Husky. Does not have to be pretty, just useable.
Have some Husky/J'red Parts, and SOME Green.
Have some Husky/J'red Parts, and SOME Green.
Looking for a 020T/200T gas tank or parts saw.
I lent one of my 200T's to a buddy and he promptly dropped it from up in the tree.
I lent one of my 200T's to a buddy and he promptly dropped it from up in the tree.
Scooterbum
Addicted to ArboristSite
Skilsaw 1644 type 3 - Canadian built - High coolness factor.
Runs strong, needs a little tweaking.Should fit the larger less plastic bill.
Loud.....Strong..... and fun to run,..................... oh yeah did i say loud?
Similar threads
