One of my favorite sounding saws

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
That's cool. Here is a link to my channel just for you. Just finished uploading 28 more videos tonight.
http://www.youtube.com/user/mtmartin2005?feature=mhum#p/u

Awesome. Thanks Stinkbait. Got me some vids to watch now. I hope your sleeper 10-10/7-10 is amoung the videos. Haven't clicked the link yet. Back in a bit....

Edit:
Just watched a bunch of your videos. Really enjoyed watching all the old Macs. Your SP125C is a beast!:cheers:
 
Last edited:
I cant hear a word you guys are saying.

I like DA-211 twin Mercs- gotta love that outta water exhaust note from a air cooled engine :)

Ive got a few favorites. 394 comes to mind. And piped saws.

<object width="640" height="385"><param name="movie" value="http://www.youtube.com/v/9rVv9ypG5-Y?fs=1&amp;hl=en_US&amp;rel=0"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/9rVv9ypG5-Y?fs=1&amp;hl=en_US&amp;rel=0" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="640" height="385"></embed></object>

<object width="640" height="385"><param name="movie" value="http://www.youtube.com/v/M43Hrvd9xTk?fs=1&amp;hl=en_US&amp;rel=0"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/M43Hrvd9xTk?fs=1&amp;hl=en_US&amp;rel=0" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="640" height="385"></embed></object>
 
Naw. I haven't had the chance to make one of it yet. Should be one coming soon though.

There was a video of that saw idling in you channel. You do need to shoot a video of it in the wood however. It'll be a hoot if you can snooker some poor guy into racing "50cc class" saws with you...:hmm3grin2orange:
 
I liked a bunch of the saws in this thread.

Here is my 056 MagII the coolest saw I have at idle.

<embed type="application/x-shockwave-flash" src="http://www.flickr.com/apps/video/stewart.swf?v=71377" bgcolor="#000000" allowfullscreen="true" flashvars="intl_lang=en-us&photo_secret=c5a90ac307&photo_id=5266912070" height="300" width="400"></embed>

To the fellows that are obsessed with embedding videos into your posts and not putting the links for your videos on the bottom (despite my recent request)............................well thanks for nothing, and a big sloppy rasberry for you........:buttkick::ices_rofl:

I forgot about your earler post. I made it short easy upload and download 6 seconds.
This link should get you to the 056.
 
There was a video of that saw idling in you channel. You do need to shoot a video of it in the wood however. It'll be a hoot if you can snooker some poor guy into racing "50cc class" saws with you...:hmm3grin2orange:

Yeah, I have plenty of wood to make a video with since the tornado came through this year. This saw will not outcut an 044 or a 372, but it's fast for what it is. It does, however, have a lot of torque. I think the last time I checked it with a tach it was turning around 12,000 to 12,300 rpms (stock is 10,500). It could probably be turned up some more, but I didn't build it to race, it's just a firewood saw. My next saw that I'm going to port is a Super Pro 81E.
 
I forgot about your earler post. I made it short easy upload and download 6 seconds.
This link should get you to the 056.

Thanks a bunch for putting in the link. Never have ran an 056. Sounds great.:D

Yeah, I have plenty of wood to make a video with since the tornado came through this year. This saw will not outcut an 044 or a 372, but it's fast for what it is. It does, however, have a lot of torque. I think the last time I checked it with a tach it was turning around 12,000 to 12,300 rpms (stock is 10,500). It could probably be turned up some more, but I didn't build it to race, it's just a firewood saw. My next saw that I'm going to port is a Super Pro 81E.

It may not outcut an 044 or 372 (modern 70+cc saws)...............but I bet it'd work over a stock MS261 or XP346. Tell them they should allow you a few cc's (4 or so over their saws since a "10-10" is 54cc) because your "10-10" is so dang old. Run an 8 pin 3/8" rim. Moooohhhaaaaaahhhaaaaaahhaaaaaaaaaaa!!!!!!!!!!:hmm3grin2orange:
 
Last edited:
Its not very good video...but here is my 5400

<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/ki3QmWQO1aY?fs=1&amp;hl=en_US"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/ki3QmWQO1aY?fs=1&amp;hl=en_US" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>
 
I also enjoy hearing the S44A and 1050 Homelites run
Great old school sound, and turn up a few Rs too

Ask and you shall recieve. Here is a video of my XP-1000/1020 frankensaw I built outta mostly NOS parts.

Here is the link for pecker head. :cheers:
http://www.youtube.com/watch?v=FDJDLzJJSsg



<object width="853" height="505"><param name="movie" value="http://www.youtube.com/v/FDJDLzJJSsg?fs=1&amp;hl=en_US"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/FDJDLzJJSsg?fs=1&amp;hl=en_US" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="853" height="505"></embed></object>
 
Hi! Da, that video caused me to find one for myself..I love the sound...and then after I asked for parts (switch) on AS, a member who didn't know me at all gave me another good appearing 655 in pieces. btw, the GB bar looks good. What length is it? :)
 

Latest posts

Back
Top