One of my favorite sounding saws

[Eccentric]

That's cool. Here is a link to my channel just for you. Just finished uploading 28 more videos tonight.
http://www.youtube.com/user/mtmartin2005?feature=mhum#p/u

Awesome. Thanks Stinkbait. Got me some vids to watch now. I hope your sleeper 10-10/7-10 is amoung the videos. Haven't clicked the link yet. Back in a bit....

Edit:
Just watched a bunch of your videos. Really enjoyed watching all the old Macs. Your SP125C is a beast!

 

[stinkbait]

I hope your sleeper 10-10/7-10 is amoung the videos.

Naw. I haven't had the chance to make one of it yet. Should be one coming soon though.

 

[blsnelling]

I cant hear a word you guys are saying.

I like DA-211 twin Mercs- gotta love that outta water exhaust note from a air cooled engine

Ive got a few favorites. 394 comes to mind. And piped saws.

<object width="640" height="385"><param name="movie" value="http://www.youtube.com/v/9rVv9ypG5-Y?fs=1&amp;hl=en_US&amp;rel=0"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/9rVv9ypG5-Y?fs=1&amp;hl=en_US&amp;rel=0" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="640" height="385"></embed></object>

<object width="640" height="385"><param name="movie" value="http://www.youtube.com/v/M43Hrvd9xTk?fs=1&amp;hl=en_US&amp;rel=0"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/M43Hrvd9xTk?fs=1&amp;hl=en_US&amp;rel=0" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="640" height="385"></embed></object>

 

[Eccentric]

Naw. I haven't had the chance to make one of it yet. Should be one coming soon though.

There was a video of that saw idling in you channel. You do need to shoot a video of it in the wood however. It'll be a hoot if you can snooker some poor guy into racing "50cc class" saws with you...:hmm3grin2orange:

 

[Work Saw Collector]

I liked a bunch of the saws in this thread.

Here is my 056 MagII the coolest saw I have at idle.

<embed type="application/x-shockwave-flash" src="http://www.flickr.com/apps/video/stewart.swf?v=71377" bgcolor="#000000" allowfullscreen="true" flashvars="intl_lang=en-us&photo_secret=c5a90ac307&photo_id=5266912070" height="300" width="400"></embed>

To the fellows that are obsessed with embedding videos into your posts and not putting the links for your videos on the bottom (despite my recent request)............................well thanks for nothing, and a big sloppy rasberry for you........

I forgot about your earler post. I made it short easy upload and download 6 seconds.
This link should get you to the 056.

 

[stinkbait]

There was a video of that saw idling in you channel. You do need to shoot a video of it in the wood however. It'll be a hoot if you can snooker some poor guy into racing "50cc class" saws with you...:hmm3grin2orange:

Yeah, I have plenty of wood to make a video with since the tornado came through this year. This saw will not outcut an 044 or a 372, but it's fast for what it is. It does, however, have a lot of torque. I think the last time I checked it with a tach it was turning around 12,000 to 12,300 rpms (stock is 10,500). It could probably be turned up some more, but I didn't build it to race, it's just a firewood saw. My next saw that I'm going to port is a Super Pro 81E.

 

[Eccentric]

I forgot about your earler post. I made it short easy upload and download 6 seconds.
This link should get you to the 056.

Thanks a bunch for putting in the link. Never have ran an 056. Sounds great.

Yeah, I have plenty of wood to make a video with since the tornado came through this year. This saw will not outcut an 044 or a 372, but it's fast for what it is. It does, however, have a lot of torque. I think the last time I checked it with a tach it was turning around 12,000 to 12,300 rpms (stock is 10,500). It could probably be turned up some more, but I didn't build it to race, it's just a firewood saw. My next saw that I'm going to port is a Super Pro 81E.

It may not outcut an 044 or 372 (modern 70+cc saws)...............but I bet it'd work over a stock MS261 or XP346. Tell them they should allow you a few cc's (4 or so over their saws since a "10-10" is 54cc) because your "10-10" is so dang old. Run an 8 pin 3/8" rim. Moooohhhaaaaaahhhaaaaaahhaaaaaaaaaaa!!!!!!!!!!:hmm3grin2orange:

 

[caleath]

Its not very good video...but here is my 5400

<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/ki3QmWQO1aY?fs=1&amp;hl=en_US"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/ki3QmWQO1aY?fs=1&amp;hl=en_US" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>

 

[Work Saw Collector]

Man it sounds good.

 

[little possum]

I also enjoy hearing the S44A and 1050 Homelites run
Great old school sound, and turn up a few Rs too

 

[foche911]

Wal-Mart is running a Christmas special and has them on sale for 99 bucks. They are usually below the Wildthings.:hmm3grin2orange:

funny

 

[Wildman1024]

I also enjoy hearing the S44A and 1050 Homelites run
Great old school sound, and turn up a few Rs too

Ask and you shall recieve. Here is a video of my XP-1000/1020 frankensaw I built outta mostly NOS parts.

Here is the link for pecker head.
http://www.youtube.com/watch?v=FDJDLzJJSsg



<object width="853" height="505"><param name="movie" value="http://www.youtube.com/v/FDJDLzJJSsg?fs=1&amp;hl=en_US"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/FDJDLzJJSsg?fs=1&amp;hl=en_US" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="853" height="505"></embed></object>

 

[foche911]

http://www.youtube.com/watch?v=zSlLruzrY4w . . . . "Old SOLO Chainsaw Cutting Wood"

 

[leeha]

http://www.youtube.com/watch?v=zSlLruzrY4w . . . . "Old SOLO Chainsaw Cutting Wood"

That is one neat sounding saw.


Lee

 

[foche911]

Spasibo Yes, I liked...so now I have two. It finally came to me that they sound like are away in deep woods..Mean Ole' Saw

 

[leeha]

I wouldn't mind having one for my collection.
Guess i will have to start looking for one.


Lee

 

[gmax]

That is one neat sounding saw.


Lee

That solo looks mighty familiar! :hmm3grin2orange:

 

[foche911]

Hi! Da, that video caused me to find one for myself..I love the sound...and then after I asked for parts (switch) on AS, a member who didn't know me at all gave me another good appearing 655 in pieces. btw, the GB bar looks good. What length is it?

 

[gmax]

You were very lucky to find one, the bar is 16".

 

[little possum]

We have 2 Solo 635's they have a interesting sound too.