Swap meet...

[Modifiedmark]

Somebody mentioned those rim/drum 25DA setups here a while ago. IIRC, they took an oddball rim. That won't work on my 1.9/XX either from what I understand. That's a good deal on that bar. I'll probably get some kind of cheap-o deal from Baileys when I swap that saw over to 3/8LP (if I don't end up trading with Mark). Was just offering to help Mark out since I have a 1/4" pitch bar and chain for these saws and he seems to want one...

Aaron, I 'm tired and its been a long day but I think the rim and drum setups on the 25'5 were mostly 1/4" pitch. Seems there might have been some 3/8lps but have to be long obsolete.

I accedetly deleted your PM while cleaning out the PMs the other night, resend it please...

 

[8433jeff]

Brad/ Sawgarage, I picked the saw up yesterday and took it apart this morning. In order to press the crank out on the clutch side I had to grind flatten where the crank broke off. I was surprised on how soft the shaft material was (really soft) . My experience with stihl cranks is they are much harder than this one. Also, the clutch bearing was dry and hard to get off the shaft. I agree that I'll have a tough time finding a replacement crank. rick

Maybe its a cheap replacement for the original already...

 

[SawGarage]

Are you thinking impact gun? I doubt thats what it was.

something along those lines...improper removal/install

 

[plumbcrazyjr]

I am in need of a carb spacer for an 032. If you have one please let me know what or how much u want for it.
thanks

 

[sefh3]

I am in need of a carb spacer for an 032. If you have one please let me know what or how much u want for it.
thanks

Are you needing the intake boot? Not sure what you mean by spacer. I have some parts laying around for these saws.

 

[plumbcrazyjr]

there is a small peice of plastic that goes under the carb against the carb box to even out the surface
thanks

 

[blsnelling]

Brad/ Sawgarage, I picked the saw up yesterday and took it apart this morning. In order to press the crank out on the clutch side I had to grind flatten where the crank broke off. I was surprised on how soft the shaft material was (really soft) . My experience with stihl cranks is they are much harder than this one. Also, the clutch bearing was dry and hard to get off the shaft. I agree that I'll have a tough time finding a replacement crank. rick

Sounds like a defective crank. That's a bummer.

 

[lpmfg]

Im needing a orange handle where throttle trigger is, not the grip handle, for a stihl ms250 Ive got lots of stihl stuff to trade but would prefer cash. email me [email protected]

 

[Northerner]

PB, i got your jonsered parts

 

[o8f150]

sprocket rim

hey guys,, i have a 3/8 7 sprocket rim that came off a cs-4400,, it is in good shape still,,,, this might fit other saws so if any can use it you can have it,,just pm me with your addy

 

[mactodd]

Anyone have useable mufflers for a Poulan 306 or 245? I need 2 of them.
Thanks.

 

[cowroy]

Have a husky 66 project that i need either a piston and ring for or a cylinder piston and ring for a 272xp, and I only have dead presidents to trade. Thanks!

 

[jimbo1490]

Do you mean the on/off choke etc. black plastic thingy?
Do you have bearings and seals for an 064? I would be willing to trade the 038 for them.

I found a replacement clutch side bearing (the oddball one) for the big Stihl saws. PM me if you want details.

 

[shawn022]

Looking for a hedge trimmer. Running or a project. I'm tired of trimmer My neighbors hedge with loppers. :msp_mad: Have some parts or a ms210 or 290 to possibly trade.

 

[wendell]

I've got a cordless Black & Decker that I used once and then moved. I'm sure it will need a new battery. PM me if you are interested.

 

[RenaisSAWnceMan]

I've got a cordless Black & Decker that I used once and then moved. I'm sure it will need a new battery. PM me if you are interested.

IF the bar is at least 32", I might be able to use it.....

 

[shawn022]

I've got a cordless Black & Decker that I used once and then moved. I'm sure it will need a new battery. PM me if you are interested.

Thanks, but I'd really like a gas unit.

 

[roncoinc]

looking for a ms170,180,210 or similar project saw $$ to trade

Something like this ???

30lbs compression..

 

[fredmc]

350

Is anyone looking for a 350 husky? My dealer has a like new, used 3 times, 350. I would be happy to pick it up for someone and ship it.

 

[hazmat5760]

I'm looking for a muffler for an early Homelite Super XL Auto.