I probably have the 440 half wrap, maybe the backing plate. I'll check tomorrow.
Swap meet...
- Thread starter Four Paws
- Start date
Help Support Arborist Forum:
I probably have the 440 half wrap, maybe the backing plate. I'll check tomorrow.
oldmar
ArboristSite Operative
If anyone's redoing a Husky 51, there's one at the shop that someone lunched the p+c on, but is otherwise really nice. Like very low hours nice, newish. Complete except for clutch drum, clutch, and needle bearing. I can get pics tomorrow.
Last edited:
Trx250r180
Saw polisher
looking for a 660 crankshaft and complete clutch if anyone has View attachment 240985
I've got a new Oregon rim style sprocket with rim and bearing for 3400 to 4000 Poulan,want to trade for one to fit a Stihl 028 Woodboss.
:msp_thumbup:
:msp_thumbup:
DO IT!!!
no, but MIGHT just try...
seems the FACTORY cranks don't last the 2,000 hrs that the saw is 'rated' for.... one wonders if it's the wonderful 50:1 mix the EPA specs out :frown: causing lack of lubrication to the bottom end.
Check your email.
I have 2 oem cranks and only 1 removed at this time. Problem is I cant send out till Wed. Work schedule change.
Really really want to see this China crank put through the wringer. :msp_unsure:
oldmar
ArboristSite Operative
The Husky 51 is sold, pending funds.
Sorry, to those that PM'd and found my inbox full- I had never considered the possibility of a full inbox, and didn't think to empty it out a bit.
Oh- I have a line on an 046 that'll be needing a crank, if anyone's got. Thanks
Sorry, to those that PM'd and found my inbox full- I had never considered the possibility of a full inbox, and didn't think to empty it out a bit.
Oh- I have a line on an 046 that'll be needing a crank, if anyone's got. Thanks
350jeepcj5
ArboristSite Operative
Looking to trade echo cs-900evl project for another interesting project in the husqvarna or stihl flavor. Inquire within.
Last edited:
I can help with the 046 crankshaft. Send Email for picture. mrupley at jps dot net
Nardoo
Addicted to ArboristSite
PM sent.
kgip2k
ArboristSite Operative
Anyone by chance have a clutch cover for a Homelite PS33?
Mastermind
Work Saw Specialist
I've quite a seen a few OEM 372 crank failures. I too would like to see the chink crank tested in a professional setting.
ptjeep
Addicted to ArboristSite
I am in need of a 394 high top filter cover. Looks dont matter. Also a decent filter if you have one. Have a nice low top cover to trade or cash.
Last edited:
kgip2k
ArboristSite Operative
Looking for some decent 30" 3/8, .058, 98 dl chains
srcarr52
We can't stop here, this is bat country.
Get someone to bump that bar out to 63 so you can get decent chain. If your located around me I will grid that bar out for you. They just don't make anything decent in 58 anymore.
Still Looking for a good stihl 084 coil. If anyone has one or knows where one is for sale. Please PM me. Thanks!
Looking for an air filter for an older Stihl 034. The AF I need does not have the hole for the carb compensator (snorkel). I can swap a brand new AF for the newer 036, MS360 that does have the compensator or can trade green paper.
I'm also still looking for a starter cup for the Lightning. Starting it is too much an adventure/hassle with the worn cup I have now.
I'm also still looking for a starter cup for the Lightning. Starting it is too much an adventure/hassle with the worn cup I have now.
Anybody got a Husky 55 choke lever in good shape?
Or any of the stuff in my sig.
I'm sure I have a 55 choke lever...
husq2100
Addicted to ArboristSite
looking for a decent 2100/2101 cylinder
