Air compressor...if they're legal in California
That intake side looks ratty
are those horizontal marks cracks in the piston skirt?
Piston only?
I’ll check.
Get a new piston kit
Piston, piston pin, rings, and circlipsWhat does the kit include?
Piston, piston pin, rings, and circlips
That should clean up with some maroon scotchbrite lubricated with wd40 unless your finger nail catches on those vertical streaks. I’m guessing that damage was done from a severely neglected air filter. Just make sure that crank is good before you order any parts. Look at the big end bearing of the rod real good and make sure the crank is not bent. Make sure there is no wobble on the pto side when you turn it. Make a pointer or use a dial indicator, something so you can see if it’s bent, turn the flywheel side and watch the pto side, take the piston off the rod so it doesn’t hang up
No, but I’ve bought my fair share of piston kitsDo you run a saw shop?
I’m guessing that damage was done from a severely neglected air filter.
No, but I’ve bought my fair share of piston kits
Enter your email address to join: