glenintenn
ArboristSite Member
with a 27" bar. No case. Looks to have barely been used... could see no visible signs of any oil or sawdust but ... pawn shops know what they're doing when it comes to clean up.
good deal?
good deal?
Want to Buy Saw a CS-600P in a local pawn shop for $399
- Thread starter glenintenn
- Start date
-
- Tags
- echo cs-600p
Help Support Arborist Forum:
GH Sawguy
ArboristSite Operative
Although it's about $150+$200 off retail, personally I'd get the cs590. You can pick them up for quite a bit less and it's basically the same saw. The only differences, to my knowledge, are the following...(I copied and pasted from previous poster)
590 - double guard laminated bar
590 - spur sprocket
590- nylon handlebar
600 - power match bar
600 - rim sprocket
600- aluminum handlebar on the later ones, nylon on early models.
To me there's not enough functional difference to spend the extra $$ Don't get me wrong...it's a kick-ass saw for 400. If it came with an unlimited coil...then maybe
590 - double guard laminated bar
590 - spur sprocket
590- nylon handlebar
600 - power match bar
600 - rim sprocket
600- aluminum handlebar on the later ones, nylon on early models.
To me there's not enough functional difference to spend the extra $$ Don't get me wrong...it's a kick-ass saw for 400. If it came with an unlimited coil...then maybe
I have a nice CS620 package ill sell you for 500?! listed on this site.
Pull the muffler and look at the piston. I’d probably buy it and I own a 590. $399 seems pretty good with the 27” imo.
Of course you need to offer them at least 30% less than what they are asking. Say 300 cash out the door to them, if they dont take it walk. You can always come back another day....My pawn shop they will give you 20% off no problem, more if you want to **** around and wait for them to call the owner.
Of course you need to offer them at least 30% less than what they are asking. Say 300 cash out the door to them, if they dont take it walk. You can always come back another day....My pawn shop they will give you 20% off no problem, more if you want to **** around and wait for them to call the owner.
Of course you need to offer them at least 30% less than what they are asking. Say 300 cash out the door to them, if they dont take it walk. You can always come back another day....My pawn shop they will give you 20% off no problem, more if you want to **** around and wait for them to call the owner.
Different carb, different cylinder, different piston, different coil, metal clutch cover also.
Orangeinthebarn
ArboristSite Operative
I’ve seen a 620p run a 27 bar it was all it wanted. I wouldn’t want to run a 27 on a 600. They are great saws with a 20.
glenintenn
ArboristSite Member
"it was all it wanted" == that's about all it could handle?
Went back in there yesterday. Gone.
The 590 also says it will run a 27" bar (per the manual)...
![01.01.2021-09.41[1].png](https://cdn.imagearchive.com/arboristsite/data/attachments/563/563534-1cc011bf56055c7c7807ac275f5a794e.jpg "01.01.2021-09.41[1].png")
https://www.echo-usa.com/getattachment/2729251f-63f4-42d5-9c45-161e871cf593/CS-590_C69015_090920_es -> PAGE 46
Pawn shop in my area is pushing an Echo 800p for $319. That’s just from online inventory so I haven’t seen it in person
GH Sawguy
ArboristSite Operative
Please give me their contact info. Thanks.
glenintenn
ArboristSite Member
Gone. Yesterday. There's a guy on here with a better saw (620P) for a good price.
That’s me!!
GH Sawguy
ArboristSite Operative
Carburetor part number A021001661 is for the cs590 and the cs600. I know that the 620 does have a different one. Part number A130002041 is the correct part for both cylinders. P021038790 for both pistons. P021045470 is the pn for both sprocket covers.
You are correct, however about the coil. I stand corrected. It's not unlimited so I have no idea what's different about it.
Damn
GH Sawguy
ArboristSite Operative
What's the deal?
620 is in fact unlimited.
GH Sawguy
ArboristSite Operative
That's what I thought. Appreciate the confirmation
GH Sawguy
ArboristSite Operative
Please message me any pics or details or a link to your 620 please
