md1486
ArboristSite Operative
I have a 272xp who have sit for a fews years.
New parts :
Fuel filter
Tank vent
Carb rebuilt with a carb kit
Fuel line and boot are not broken or cracked.
P&C is perfect.
New fuel 40:1 non ethanol
I can make the saw run and cut, but with the carb at 2.5 turn on the low side, but throttle response is bad (acceleration).
I have tried to adjust carb multiples times and can't make it run right.
When at idle no change in sound when I turn saw from side to side (air leak)
At standard carb setting L 1, H 3/4 she doesn't even want to start.
What I am missing ?
Thanks,
New parts :
Fuel filter
Tank vent
Carb rebuilt with a carb kit
Fuel line and boot are not broken or cracked.
P&C is perfect.
New fuel 40:1 non ethanol
I can make the saw run and cut, but with the carb at 2.5 turn on the low side, but throttle response is bad (acceleration).
I have tried to adjust carb multiples times and can't make it run right.
When at idle no change in sound when I turn saw from side to side (air leak)
At standard carb setting L 1, H 3/4 she doesn't even want to start.
What I am missing ?
Thanks,