372xpw vs. 365

[dbowling]

Which would you choose between the 2 the 372 is used but been gone through, new bearings gaskets etc, with 28 in bar 485.00 vs. brand new 365 w/28 in. bar for 699.00 pl. tax.. the 372 would be about 515.00 shipped, seller says it runs perfect, saw is going to be used to fell/buck occasional really big logs or trees. Also the 372 is the bigger bore pre EPA saw.

 

[mdavlee]

372 then. If you want a new one get with the site sponsors tlandrum or spike

 

[J.Walker]

75cc vs 65cc. Ten cc's would be alot to give up in big wood. Get the xpw!

 

[tlandrum]

the new 365 is actually a 372 if you looking at the cc's of the new x torq saw. in 15min I can make the 365 the same saw as the 372

 

[mikey517]

If it's a new 365 X-torq, it's a 70cc saw... Built exactly the same as the 372 X-torq except for the placement if 2 baffles and a low air filter.
I just got one at the end if October. Strong saw. I opted for new w/ extended warranty (4 yr. when I bought 3 cans of 50:1 fuel)



Sent from my iPhone using Tapatalk

 

[SawTroll]

Which would you choose between the 2 the 372 is used but been gone through, new bearings gaskets etc, with 28 in bar 485.00 vs. brand new 365 w/28 in. bar for 699.00 pl. tax.. the 372 would be about 515.00 shipped, seller says it runs perfect, saw is going to be used to fell/buck occasional really big logs or trees. Also the 372 is the bigger bore pre EPA saw.

Hardly pre EPA, rather pre "strato"!