460 vs 372

[pbuehning]

Time to stir it up.

It hasn't been asked in a while and I've got some $$$ burning a hole in my pocket so how about it - WHICH ONE DO I BUY???

Don't hold back, now - be honest. This should be interesting! opcorn:


MS 460 STIHL Magnum™ Chain Saw
DISPLACEMENT 76.5 cc (4.7 cu. in.)

ENGINE POWER 4.5 kW (6.0 bhp)

WEIGHT (powerhead only)
Flush-Cut 6.6 kg (14.6 lbs.)
Wrap-Handle 6.9 kg (15.2 lbs.)
STIHL Arctic™ 6.8 kg (15.0 lbs.)

FUEL CAPACITY 800 cc (27.1 oz.)
CHAIN OIL CAPACITY 325 cc (11.0 oz.)
OILOMATIC® CHAIN 3/8" RSC3
RECOMMENDED RANGE
OF GUIDE BAR LENGTHS 40 to 80 cm (16" to 32")



Husky 372XPW
Technical Data
Engine specification
Cylinder displacement 74.7 cc
Power output 5.4 hp
Idling speed 2700 rpm
Maximum power speed 9600 rpm
Maximum recommended engine speed 13500 rpm
Cylinder bore 2.02 inch
Cylinder stroke 1.42 inch
Fuel tank volume 1.62 US pint
Oil tank volume 0.89 US pint
Oil pump type Adjustable flow
Oil pump capacity 4-21 ml/min
Cutting equipment
Chain pitch 3/8"
Recommended bar length, min-max 15"-28"
Chain speed at max power 70.21 fts

Overall dimensions
Weight (excl. cutting equipment) 13.4 lbs

 

[441_Stihl]

I like them both but id get the 460

 

[davefr]

None of the above. Get the Dolmar 7900. It's about the weight of a 372 with power that exceeds a 460.

Why compromise when you can have the best of both worlds.

 

[pbuehning]

Hadn't thought of that.

 

[2000ssm6]

Although a 7900 is bad arse, they are sometimes hard to find......

460 vs. 372 hmmmmm.....

Both are fine saws, but I have never ran a 372 or 375. I have ran the **** out of a 046 and 460 and will say they are awesome, even better when ported. If you will be running a 25"+ bar, I would lean towards the 460. 20" could go either way....****, just get the 460.

 

[Evanrude]

None of the above. Get the Dolmar 7900. It's about the weight of a 372 with power that exceeds a 460.

Why compromise when you can have the best of both worlds.

I'm with this guy as long as you have the dealer support.

 

[BIGBORE577]

Buy all three so there is never a doubt. This way no one can call you brand loyal and tell you that you've made the wrong decision. Well, at least most won't.

 

[2000ssm6]

Buy all three so there is never a doubt. This way no one can call you brand loyal and tell you that you've made the wrong decision. Well, at least most won't.

LOL, then he will have to get a Jred, Solo, Redmax, Pullon, etc.:jawdrop:

 

[Burvol]

372 all the way, a better saw in my opinion. The air filtration and long range of power is better than that of the 460. Both good saws, but I like the 372 better. I have a 460 and wish I had the other!

 

[441_Stihl]

the 372 dont have more power the the 460

 

[2000ssm6]

Oh ****, here we go...........

:arg: :bringit: :angrysoapbox: :check: :wave:

 

[brncreeper]

It hasn't been asked in a while and I've got some $$$ burning a hole in my pocket so how about it - WHICH ONE DO I BUY???

Which one? You gotta be kidding...get the 372!:greenchainsaw:

 

[gafirefighter]

Just go ahead and get the 395 while you are at it. Really though, I would go with the 372. I have a 372 and now a 371. Love the saws. Great power and easy to manage. Just my .02.

Adam

 

[2000ssm6]

372 all the way, a better saw in my opinion. The air filtration and long range of power is better than that of the 460. Both good saws, but I like the 372 better. I have a 460 and wish I had the other!

Out in the PNW, you should be able to take 2 or 3 steps and sell that 460, just a thought, my .02 worth, but may need change.

 

[BIGBORE577]

LOL, then he will have to get a Jred, Solo, Redmax, Pullon, etc.:jawdrop:

I did say most, even if only by a small margin!:smoking:

 

[2000ssm6]

I did say most, even if only by a small margin!:smoking:

At least the top three were mentioned anyway.

 

[BIGBORE577]

To some this is like asking; "Who's mom cooks best"!

 

[Burvol]

the 372 dont have more power the the 460

You should learn to read and comprehend. Hence, the part you failed on the Iowa Basics test. I said the range of power is better. It is. the 460 is a great saw, but 372 is much more plush.

 

[ropensaddle]

I have not run the 460 so can't comment on its performance but I
have two 372's and they are sweet. I feel the 460 and the dolmar 7900
are neck and neck but I have ran the dog crap out of one of my 372s and
only a coil in around five years hard use! For the first four years it was my
only big saw then I found this site and 2 372's 1 2101'-=and a new 395==++
and stihl combi tool and br600 blower and they call this a free forum

 

[441_Stihl]

the 372 I used cut good but had only power on top end no low grunt