parrisw
Tree Freak
$US34 here, and a lot closer for psotage.
http://cgi.ebay.com/STIHL-FLYWHEEL-...1QQcmdZViewItemQQ_trksidZp1638Q2em118Q2el1247
Thanks
$US34 here, and a lot closer for psotage.
http://cgi.ebay.com/STIHL-FLYWHEEL-...1QQcmdZViewItemQQ_trksidZp1638Q2em118Q2el1247
easily see by eye though? probably a few thou anyway.
Carefull on the bearings.. they are not "DEEP GROOVE" radials that you normally see, and often appear to have more movement.
Get it going before worrying yourself onto a complete tear down. It won't run any worse than just before the last time it stopped
Hey Parrisaw,
If the recoil cover shown is the original one which came with the saw,you may indeed have an 090.
The 070's have got 3 fin bars to the right of the "gunsight".The 090's have 4.
Your pic on the first post shows 4.
just maybe??
Hey Parrisaw,
If the recoil cover shown is the original one which came with the saw,you may indeed have an 090.
The 070's have got 3 fin bars to the right of the "gunsight".The 090's have 4.
Your pic on the first post shows 4.
just maybe??
Some guys use a straw thru the exhaust port to measure the bore.
Then you have just won the chainsaw lottery. JR
66 mm.............Ok,
Whats the bore on a 090??
Its an 070, measured at about 58mm.
Well if that's the case you might as well stick it in the mail for me!!!
Enter your email address to join: