AUSSIE1
Al.
- Joined
- Aug 25, 2006
- Messages
- 8,004
- Reaction score
- 1,979
42", crickey I thought 32" was overkill on my 395, lol.
A 9 pin is getting close to being hard to keep the chains on. I have a 9 that I haven't run yet but test fit to see if I had to trim the bar. It keeps the chain from touching the first inch or so on the end close to the sprocket. A stock 660 doesn't like a 32" and an 8 pin in hardwood about 25". A ported one should have no problem with it as I'm running an 8 on my 390 with a 28" bar and it will pull it buried in oak. A 372 won't pull an 8 with as much torque. You won't be able to lean on it as much as the 660 per say.
i run 40/1
otheres have switched to 32/1 with good results. i dont like the recmended 50/1 i like alittle more oil in my fuel for alittle peace of mind
Enter your email address to join: