MS500i

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Is that from a hone? Not much going on down there. Sand it smooth and it will be fine
No, was there before I started to clean the transfer with acid and fine wet/dry paper. Polished with green scotch guard.
It is worn through the plating in that one spot…pretty weird.
I hadn’t noticed until after the cyl got a Sonic bath in soapy(dawn) water.
I figured it would be ok down that far. New OE piston kit ordered.
 
No, was there before I started to clean the transfer with acid and fine wet/dry paper. Polished with green scotch guard.
It is worn through the plating in that one spot…pretty weird.
I hadn’t noticed until after the cyl got a Sonic bath in soapy(dawn) water.
I figured it would be ok down that far. New OE piston kit ordered.
Try some ScotchBrite next time......
ScotchGuard to prevent unsightly piston stains.

lol
 
Back
Top