Little Jerrry
ArboristSite Operative
- Joined
- May 17, 2014
- Messages
- 144
- Reaction score
- 70
Hi
I have a disassembled saw that I'm restoring but having trouble determining how to remove the brake band from the saw housing. Below is a sample pic of the brake band and associated bits.
With the end with the pin in the upper right of the pic - does it all come out as one as you cannot use a punch on that pin? I tried using needle pliers on the band itself but there is not enough room to grab anything. Its the pin end that is wedged tight into the housing
Any help would be appreciated
I have a disassembled saw that I'm restoring but having trouble determining how to remove the brake band from the saw housing. Below is a sample pic of the brake band and associated bits.
With the end with the pin in the upper right of the pic - does it all come out as one as you cannot use a punch on that pin? I tried using needle pliers on the band itself but there is not enough room to grab anything. Its the pin end that is wedged tight into the housing
Any help would be appreciated