JAXJEREMY
ArboristSite Operative
What's up guys, I was camping over the weekend and always bring my saw to cut firewood. When I got back and started cleaning the saw, the rim washer fall out right onto me workbench..Amazed it didn't fall out in the woods..I realized the e-clip was gone, but luckily I had a spare from an old parts saw.
I'd like to get some spares, the diagrams I've found on the interweb lists them as 8x1.3. Is this something should I get from the dealer, or can I source at my local hardware store? Also, should I replace the rim washer at the same time? Thanks in advance.
![1647863085194.png 1647863085194.png](https://cdn.imagearchive.com/arboristsite/data/attachments/659/659384-12a28ac15f4b13b3077e07ed10fa9139.jpg)
I'd like to get some spares, the diagrams I've found on the interweb lists them as 8x1.3. Is this something should I get from the dealer, or can I source at my local hardware store? Also, should I replace the rim washer at the same time? Thanks in advance.
![1647863085194.png 1647863085194.png](https://cdn.imagearchive.com/arboristsite/data/attachments/659/659384-12a28ac15f4b13b3077e07ed10fa9139.jpg)