stihl041avhog
ArboristSite Guru
Change the leaking oil line and now it's not oiling. My question is how does the oil pump come out. I use Yambond 4 on the line and some of it got in the pump i think
Stihl ms211 oil pump
- Thread starter stihl041avhog
- Start date
Help Support Arborist Forum:
- Joined
- Dec 6, 2014
- Messages
- 21,175
- Reaction score
- 25,045
Comes out the same was as the ms170, ms250 etc.
- Joined
- Dec 6, 2014
- Messages
- 21,175
- Reaction score
- 25,045
The tool can be replaced with a regular metric screw and redneck charm......
stihl041avhog
ArboristSite Guru
Thanks HarleyT
albert
Addicted to ArboristSite
There is a service bulletin to fix the leaking hose. It evolves cutting the hose at the built in gromet at the tank and inserting a dounle barbed fitting. That will expand the hose gromet to stop the leak and allow the other end of the hose to reconect.
stihl041avhog
ArboristSite Guru
pull the pump with screw and my redneck charm. didn;t see anything wrong with it. i pulled one from a ms250 i had around. installed it and now got oil. y don't need that special tool
Khntr85
Addicted to ArboristSite
I had fits with one of these bastards.... I had a ms250 that got very hot(I assume ran with chain brake on.... well come to find out the damn oil pump wasn't seated correctly.... as soon as I got holes lined up it oils perfectly.... what a pain in the AS$ This saw was....
