Stihl MS441CRM-Tronic Ported Work Saw Review

[Stihlman441]

This i found interesting,the saw on the left is ported from new and has had about 40 tanks of fuel through it,the saw on the right is on its second tank of fuel stock.(started to take muff off when i noticed colour )
Notice the colour differances the stock saw is running higher temps.

 

[Stihlman441]

Third tank of fuel in Pine.
The MTronic system has no problem adjusting itself to the muff modd,this saw is going to be ported so the large size opening may not be required on a stock one.Even if you leave the spark screen in and opened the port up as much as possible will help a lot.

[video=youtube;RbgLlRkiP7c]http://www.youtube.com/watch?v=RbgLlRkiP7c[/video]

 

[Stihlman441]

cool man:boss:

I think you are going to have to run one just to see how cool they really are.:msp_wink:

 

[blsnelling]

I saw roughly a 4 second gain, good for about 11-12%. Not bad at all for just a MM. It sounds to be holding it's RPMs WAY better with the MM.

 

[deye223]

I think you are going to have to run one just to see how cool they really are.:msp_wink:

just keep a big block handy andy we will get there LOL:big_smile:

 

[Stihlman441]

Fresh one.
The son in law to be took the other one.:msp_smile:
I ordered this on the 3/5 and today being the 8/5 thats not bad 5 days from the UK.:msp_biggrin:

 

[Rudolf73]

Must be be good saw then, having fun with yours Andrew?

 

[Stihlman441]

Must be be good saw then, having fun with yours Andrew?

I only got to use it for three days and then it was gorne.

I just realised i put this in the wrong thread.