If I regularily cut when it was 20F I would want one of these:
There is a "Arctic" model as well?? What makes it Arctic? Will it run when its 90º out? Will it have a blue chain for cold?
![Cold :cold: :cold:](/styles/toronja1/emoticones/frio.gif)
If I regularily cut when it was 20F I would want one of these:
Heated handle, carb deicer
There is a "Arctic" model as well?? What makes it Arctic? Will it run when its 90º out? Will it have a blue chain for cold?![]()
I bought a 362 C without the M-Tronic because I can tune my own saw just fine and I feel that the computer is one more thing to go wrong.
It has been a great saw, has a 25” Bar and I use the yellow chain. The yellow chain cuts like butter in clean wood. However you mentioned that you have some dirty wood, that will dull a yellow chain very fast. So watch out for the dirt.
Sent from my iPhone using Tapatalk Pro
Sorry, but the yellow link on the chain has absolutely nothing to do with how long a chain stays sharp. It denotes the level of kickback reduction features on the chain. I believe you're thinking of semi chisel versus full chisel. Both are available in yellow and green chains. Fill chisel cuts faster and dulls easier.
I want a DEPENDABLE 60cc saw that will start when its below 20º in the winter and run when its 90º in the summer. I use it every weekend. I own a forest so I cut firewood and clear downed trees mostly good wood but some is dirty.
You are looking at the wrong color saw then. If you want a stihl to get up and go to work in the morning, you need to tuck it into bed at night with a glass of warm milk. Waltz over to the dark side and grab a husky 562xp and you will never look back.
I want a DEPENDABLE 60cc saw that will start when its below 20º in the winter and run when its 90º in the summer. I use it every weekend. I own a forest so I cut firewood and clear downed trees mostly good wood but some is dirty.
Uh oh....Can you tell me about it? It is also computer controlled?
Can you tell me about it? It is also computer controlled?
“I only ride em, I don’t know what makes them work” Oddball, Kelly’s Heros MGM’ 1970. Yup, some sort of computer doin’ smoothing but the saw starts just like a regular saw with a choke lever. Only difference I have found is that it usually takes two pulls to start when warm.
In cutting the saw adjusts itself to run optimally given cutting conditions. In layman’s terms, the saw simply gets pissed off the wood and just when you think its bottomed out, it will dig a bit deeper and find a few more CC. It is one of the most impressive saws I have ever run out of the box.
Uh oh....
You just can't do this to the Stihl guys. They're sensitive. You set off an alert on their phones when you put Stihl in the thread title, that's all you're going to be able to talk about here.
Sorry, gotta start a new one if you wanna talk about work saws![]()
I wouldn’t worry too much about the new computer-controlled tech. For the most part, it seems to be working out well. The improvements in power and fuel efficiency are impressive and welcome. Case in point, I am in need of a new dumpy old sedan to drive but I prefer a manual transmission. I made the mistake of test driving a new Honda accord recently. I figured a tiny little 2L engine? How good could this thing be? My small truck displaces 6L. I will tell you, I was impressed at the new technology.
https://www.youtube.com/watch?v=wSCcvE4pZNQ
Honda makes a chainsaw?
Honda makes a chainsaw?
I'm going to disagree with this one. I've ran a ms441 carbed and converted it to a mtronic. Runs much stronger. At WOT they sound really close to where I'd adjust the carb to.The computer adjusts the carb per emissions.
The non computer model you adjust the carb.
Enter your email address to join: