WolfMann
ArboristSite Operative
Computer system model codes, think its bad now wait till they add computer displays USB ports and a coffee cup holder.
Chainsaw just needs a 6 inch touch screen and WiFi capability.
Computer system model codes, think its bad now wait till they add computer displays USB ports and a coffee cup holder.
I'm going to disagree with this one. I've ran a ms441 carbed and converted it to a mtronic. Runs much stronger. At WOT they sound really close to where I'd adjust the carb to.
The mtronic just meters the fuel similar to how you do with the screwdriver. But multiple times per second, and while you are cutting. Assuming you don't set your manual carbs overly rich by hand, the stratos and restricted muffler is where the emissions come into play.
Correct I agree with you I was saying the carb adjusts per the reading of the emissions coming out of the engine.
Which in turn makes it more fuel efficient with less emissions than running it rich.
Correct I agree with you I was saying the carb adjusts per the reading of the emissions coming out of the engine.
Which in turn makes it more fuel efficient with less emissions than running it rich.
That's not the case. The chip adjusts the fuel rate based on the rpms that the motor is turning. Flywheel speed is what it reads. So if it's turning too fast it adds fuel and vice versa.
That's not the case. The chip adjusts the fuel rate based on the rpms that the motor is turning. Flywheel speed is what it reads. So if it's turning too fast it adds fuel and vice versa.
Ok I got you now I thought it was more emission related.
Thanks for clearing that up.
Enter your email address to join: