Stihlcranking
ArboristSite Lurker
Have a Stihl MS210c. Seems like it is always giving me carb trouble. Had it sitting this summer, and needed to get ready for the fall for some firewood . Dumped the gas, took the carb off/apart and cleaned it. Cleaned the plug, and the air filter was good. The mesh screen was also cleaned.
I reset the L and H screws to the recommended (3/4 turn off H and 1 full turn of L). Can't get the LA screw set because it stalls before I can adjust.
When I first start it up it fires right up. I can rev it full throttle, and when i let off the throttle it idles for a few seconds, and dies. It won't restart. Let it sit a while, and the same thing happens over again.
What am I missing? I haven't had this kind of issue before...
I reset the L and H screws to the recommended (3/4 turn off H and 1 full turn of L). Can't get the LA screw set because it stalls before I can adjust.
When I first start it up it fires right up. I can rev it full throttle, and when i let off the throttle it idles for a few seconds, and dies. It won't restart. Let it sit a while, and the same thing happens over again.
What am I missing? I haven't had this kind of issue before...