Sure is quiet in here....do I need to start a fight?

shop deals on amazon
Treestuff
Wesspur
Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Okay. Husqvara workshop manual says 350 has 44mm ring and 350 EPA has a 45mm ring. Get the right ring and hopefully be good to go. Grrr.


Rick
 
Okay. Husqvara workshop manual says 350 has 44mm ring and 350 EPA has a 45mm ring. Get the right ring and hopefully be good to go. Grrr.


Rick
 
Cantdog said:
Yep but still check the end gap before you assemble....then you know...no guess work...good luck!!
Click to expand...

Right. Another fine lesson learned. LOL. Will check it before it goes back together. Don't really want to take it part again.

I'll have a ring if someone needs a 44mm ring LOL


Sent from my iPad using Tapatalk
 
Hey guys!
Back home tomorrow!

John, any recommendations on GOOD autobody hammers?

The tractor project needs a lot of bodywork, and the chinese cast iron crap tools we have now really won't cut it.....

The martins at KMS look nice, and are about $20 less than the snap ons..

I know from my experience with their blacksmith hammers that picard of Germany would be real good, but they are even more than snapon.....

Ebay is an option, but once you factor in shipping, and all the time to clean them up and dress the faces, you are not saving much....

Figured you would be the guy to ask?
 
Busy day today......tractor was not interested in starting....had to bring out my own personal jet engine and blow 150,000 btu of K1 heat on it for a half hour or so. Cleared the shop yard of all the new snow.....the mail lady showed up with two pkgs.....1 smelled good..... the other......not so much...but it did look to be intact and buildable.....it's OK.... Mikey likes the smell...he's used to it....thanks again you guys...

Then down in the woods to beat my ice road down..then back to the 24" maple that had to go....nice and straight...tall....grew up with others so no limbs until the very top.....was able to drop it right along side my main ice road.....perfect....wood was nice...processed (fit and split) one pickup load of small (12 long) limb wood for the cookstove...forward out and dump in the truck. Have to finish the main stem tomorrow....little better than a cord in that tree I estimate...top was nice and dry.....some in the cookstove as I type....burning hot....
 
BigDaddyR said:
Right. Another fine lesson learned. LOL. Will check it before it goes back together. Don't really want to take it part again.

I'll have a ring if someone needs a 44mm ring LOL


Sent from my iPad using Tapatalk
Click to expand...

Learning is good....painful at times...but as long as we learn we are gaining...we all should and can be learning all the time....no one knows everything... LOL!! I use to have a guy working on my crew....hell of a good guy...fresh V-nam vet....I was boss...he was a laborer....I'd tell him something..he'd look at me and say "You know.......you don't know it ALL.....I know a little bit"....in his "before Tim Sample Maine accent" ...LOLOLOL!!! Gil was good folk....we had a blast....
 

Similar threads

teacherman
Opinions on Forester chain compared to Stihl
2 3 4
Replies
67
Views
3K
NSEric
N
P
In the market for a bigger saw
2 3
Replies
40
Views
2K
Pjohnson
P
ace4059
Possible new bad gas. What should I do?
6 7 8
Replies
154
Views
5K
Khntr85
Khntr85
E
Husky 565 vs 365, innitial impressions.
Replies
0
Views
171
Exophysical
E
ace4059
I need a larger chainsaw
10 11 12
Replies
235
Views
20K
ace4059
ace4059

Latest posts

Back
Top