Sure is quiet in here....do I need to start a fight?

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
T-day arrived with the temp 7 degree 'Merican and wind blowing 40-50 knts NNW....sea smoke was thick....spent the whole day on the staging cedar shingling and nailing by hand. Once the sun got up it was pretty decent as I was working the south end in the lee with a still warm sun on my back but boy it was rough everywhere else but there...here are a few of the general conditions all day...never warmed above about 10-12 'Merican....first pic you can see just the top of Brimstone peeking through the vapor.....
The bride made sure the camp was warm........this was with the new window cracked 2-3 inches!!! Jonsereds cut mainland hardwood and good Swede stove gittin 'er done....!!!!

View attachment 687741 View attachment 687742 View attachment 687743 View attachment 687744 View attachment 687745
9
 
Clear n cold today, may put off running saws today til it warms up a tad, got plenty of indoor repair work to get caught up on.
Worried the last cooler line out of the truck radiator........last one was the worst as usual.....went and got a samich at the store and 5 gal diesel....cold here too...ground firmed up fair...guess I'll grab the trusty old 49sp and tractor myself down back and get a couple buckets of wee cookstove wood....getting low at home....haven't been able to get down there because of all the rain this fall...no sense making a mess...
 
'Nuther tank swap on a 562Xtra Pee came in today.....one of Edwards cutters.....he just as hard as Edward on saws.....but ...boy...don't they love those 562s.....all just $$$ to me......I'm startin' to love 'em too!!! Not to bad to work on really for modern ****......made a couple Gs 'Merican off those 562/560/555 family so far......starting to feel like a drug dealah....or at east an enabler....
 
'Nuther tank swap on a 562Xtra Pee came in today.....one of Edwards cutters.....he just as hard as Edward on saws.....but ...boy...don't they love those 562s.....all just $$$ to me......I'm startin' to love 'em too!!! Not to bad to work on really for modern ****......made a couple Gs 'Merican off those 562/560/555 family so far......starting to feel like a drug dealah....or at east an enabler....
You sure seem to work on a lot of them . LOL
 
You sure seem to work on a lot of them . LOL

All the wood boogers 'round here use them.....just the right size for our trees...firewood, pulpwood, studwood....and most saw logs.....fekkin' things really rip....pretty light and as long as you don't need torque they're the ticket. They only cut good wide open.....good saw for a fella that does repair work!! LOL!!!
 
Quit sharing Canadians.
886d32d02c85b9babb21baf469114c79.jpg
77189d6e2b87bb530592dd4bb90c58fb.jpg
e3d339beeb9b9fbde06798d5bfd5eb8a.jpg
 

Latest posts

Back
Top