Swap meet...

[promac850]

Thought it was worth a try. This engine is junk and going for scrap in a few weeks.

Is the carby any good? Might be able to put it on a really big saw...

What happened to the engine? Blown gasket? Hole in piston? Needs rings? If it's any of the above, it can be repaired quite cheaply, if done by yourself, not a shop.

 

[betterbuilt]

Is the carby any good? Might be able to put it on a really big saw...

What happened to the engine? Blown gasket? Hole in piston? Needs rings? If it's any of the above, it can be repaired quite cheaply, if done by yourself, not a shop.

I got it pretty cheap and it ran, but it would kinda run away. It would actually go so fast the oil would start running out of it. The crank had a bunch of play in it and you could move the flywheel in and out.

Anyone need a carb?

 

[promac850]

I got it pretty cheap and it ran but it would kinda run away. It would actually go so fast the oil would start running out of it. The crank had a bunch of play in it and you could move the flywheel in and out.

That ain't good... Unbolt the intake, leaving the carb on the intake, and I'll be happy to save it. (the carb, intake, etc. not the engine...)

 

[Nardoo]

Looking for a complete ignition unit for a Dolmar 122 electronic (same as Dolmar 120) . It is the one that goes under the flywheel, Part #119 142 100 (119 142 200 will also work). Will pay $$ and shipping to me in Oz.

Thanks Al.

 

[Madsaw]

Looking for a complete ignition unit for a Dolmar 122 electronic (same as Dolmar 120) . It is the one that goes under the flywheel, Part #119 142 100 (119 142 200 will also work). Will pay $$ and shipping to me in Oz.

Thanks Al.

Al,
I think there is a 120 at the dealer here. I can check in the next day or 2.
Any other dolmar parts you need looked for too when I am there?
Bob

 

[Duke Thieroff]

Anyone have a set of rings for a Mac 1-76/1-86?

Chris

 

[PLMCRZY]

Poulan Pro 42cc

<a href="http://s75.photobucket.com/albums/i320/clayster89/?action=view&amp;current=DSCN2248.jpg" target="_blank"><img src="http://i75.photobucket.com/albums/i320/clayster89/DSCN2248.jpg" border="0" alt="Photobucket"></a>

Comes with a poulan 4218 engine that is in good condition. I think all you would need is a 4218 intake setup, to swap everything.

I will trade for next to nothing or sell it. I need to get it out please!

 

[lpmfg]

Looking for stihl 056 mag Piston, Muffler, Killswitch, and Handle also need jonsy 920 brake handle. email me [email protected]

 

[Mastermind]

I'm still seeking a 371/2 recoil.

I also need a few husky 51/55 parts. A recoil housing (I have all the guts, mine is just real ugly), fan shroud, chain adjuster, and this is a long shot but a closed port 55 jug would be sweet.

I have stuff to trade and a little moldy cash.

 

[wigglesworth]

I'm still seeking a 371/2 recoil.

I also need a few husky 51/55 parts. A recoil housing (I have all the guts, mine is just real ugly), fan shroud, chain adjuster, and this is a long shot but a closed port 55 jug would be sweet.

I have stuff to trade and a little moldy cash.

I still kick myself for not getting my closed port 55 out at the GTG....Its pretty impressive.

Anyways, I "should" have the 55 parts. Ill look in the morning.

<iframe title="YouTube video player" width="640" height="390" src="http://www.youtube.com/embed/S9PxilYKRcc" frameborder="0" allowfullscreen></iframe>

 

[Mastermind]

That is a sweet running 55 Jeremy. :msp_thumbup:

Thanks for looking for these parts. I got two of these from a guy yesterday, both need some love. I keep one for fixing the other. I like those deals.

 

[Duke Thieroff]

Anybody have any interest in a Husky 2101, powerhead only?

The good

New piston, NOS carb.

The bad

Fair cosmetic shape, needs tank breather, is experiencing an air leak somewhere, seems like crank seals. Recoil will slip sometimes. Will send a brand new cylinder gasket.

A great big bore rebuilder saw.

Interested in runners of all types, possibly projects, but prefer Macs most of all, let me know what you got.

Chris

 

[gloud]

Darn all I have is a basket case PM 805 and a complete CP55
(the 805 is missing the coil, muffler, and bad piston. and all the screws.)

Anybody have any interest in a Husky 2101, powerhead only?



Interested in runners of all types, possibly projects, but prefer Macs most of all, let me know what you got.

Chris

 

[Mastermind]

How about a great running 1-70 with a nice b&c???

 

[huskydude]

any interest in a poulan 2000 with b+c?
took off muffler, cylinder looked good. runs but carb needs rebuild and I think the crank bearings are shot.

 

[Duke Thieroff]

any interest in a poulan 2000 with b+c?
took off muffler, cylinder looked good. runs but carb needs rebuild and I think the crank bearings are shot.

No thanks on that one man

Chris

 

[huskydude]

lol. yeah, i figured that is probably the general consensus.

 

[shawn022]

Looking for some parts for a Stihl 660. I need a rear muffler half, top model tag, and the baffle that goes between the top covers.

I have what I believe is a mismatched 064 muffler. Halves don't match if anyone needs either half.

Also looking for a 28" bar for the 660 and possibly an 18" or 20" for a 290. Thanks

 

[vw_motorsports]

Dolmar 143 parts

Looking for a Dolmar 143 parts saw...why? I don't know

 

[PLMCRZY]

Looking for anything that needs some tlc....want to start flipping saws on the side. I got a few things to trade, but i will pay cash for saw and shipping if needed.