Swap meet...

[stihlboy]

what would you trade for an 066??? pm me we might have similar interests

 

[Brushwacker]

I've got an old Remington sprocket nose bar and a new gasket set for a Stihl 08/S10 saw. May have a few more parts for that 08/S10 too....

I'm always looking for Shinny parts and saws.....

I need the choke slide for an S10 stihl tophandle. If you or anyone has 1 give me a price or let me know what your looking for. Also I need the gas tank rear handle assy for an ms440.
I have quite of few stihl 026 and 028 parts,an 041 non av I could part,an 066 crankshaft assy in a broken crancase,some new Oregon powermatch 24" 58 gauge bars ( large and small mount )and 24" 58 gauge chisel chains that fit most Husky and Dolmar.

 

[Steve K]

034 stuff needed

Looking for a stock handle, brake handle and rear cover for a 034. $$

 

[Bowtie]

362/365/372

im looking for a throttle cable and clutch cover for a 362/365/372 series Husqvarna.

I also need a muffler back housing for an 034, or a complete 036 muffler.

 

[epicklein22]

im looking for a throttle cable and clutch cover for a 362/365/372 series Husqvarna.

I also need a muffler back housing for an 034, or a complete 036 muffler.

I believe I have a brand new OEM clutch cover for the husky, pm me.

 

[Brushwacker]

I have a little Mac 6 that runs like a top but it has a 1/4'' clutch sprocket and would like to switch over to low pro 3/8 can anyone help me out.

I went through my drawer of McCulloch small parts. I can't find all the applications to P/N's, but I 'll give some small sprocket #'s I have and any applications I found.
P/N 90150 fits mini-mac 25&30 + ?,
P/N 215252 is 6 tooth lp 3/8 fits 100 + 300 series,
Have a complete clutch (no sprocket) P/N 85450A
Have several medium to large sprocket's, starter springs,carburators,a fly wheel ignition kit P/N 219331, few ignition coils,2) rod assymblies P/N 85352, new crank P/N 216910. I have another box with some larger parts I think fit mostly small McCulloch. I sold or used most of the PM 700 parts but I do have a clutch mabe a carb.
Could be interested trading for medium to large Stihl parts saws or ?

 

[MS460WOODCHUCK]

I went through my drawer of McCulloch small parts. I can't find all the applications to P/N's, but I 'll give some small sprocket #'s I have and any applications I found.
P/N 90150 fits mini-mac 25&30 + ?,
P/N 215252 is 6 tooth lp 3/8 fits 100 + 300 series,
Have a complete clutch (no sprocket) P/N 85450A
Have several medium to large sprocket's, starter springs,carburators,a fly wheel ignition kit P/N 219331, few ignition coils,2) rod assymblies P/N 85352, new crank P/N 216910. I have another box with some larger parts I think fit mostly small McCulloch. I sold or used most of the PM 700 parts but I do have a clutch mabe a carb.
Could be interested trading for medium to large Stihl parts saws or ?

I went to a huge flea market yesteday and picked up 3 mini mac's for 7.00 total hopeing one would have a sprocket that would work and I got lucky. So my problem is solved. I even got a good bar and 2 chains with one.

 

[cleaf30]

I'm looking to buy a gas cap to pioneer 610, I believe any 600 series will work though.

 

[Work Saw Collector]

I'm looking for a full wrap for a 038 PM me thanks.

 

[MS460WOODCHUCK]

I have a good running 039 with 20'' bar to go. I will try to get some pictures later.

 

[StihlGuitar]

044 rear handle

I'm looking for an 044 rear handle/gas tank assembly. Willing to trade Stihl parts or pay cash.

 

[cbolyard]

I'm looking for an 044 rear handle/gas tank assembly. Willing to trade Stihl parts or pay cash.

I have a 440 tank assembly, flip cap style if that would work.

 

[blsnelling]

I'm looking for an 044 rear handle/gas tank assembly. Willing to trade Stihl parts or pay cash.

You don't see them very often on eBay, but I saw a 044 tank just this last week. I'm not sure if it's still there or not.

 

[MS460WOODCHUCK]

Here is a picture of the 039 that I am looking to get rid of. It is pretty clean and runs great.This saw starts right up and cuts good. I took off the muffler to look at the piston and rings and they look to be in very good shape from what I could see. The oiler works good. The bar is a 20'' that is missing a little paint but still has alot of life left to it and it is the original stihl bar. The only bad part is that it has the safety chain which has about 2/3 of life left to it. PM me if interested.
<a href="http://s493.photobucket.com/albums/rr293/ms460woodchuck/?action=view&current=saws034.jpg" target="_blank"><img src="http://i493.photobucket.com/albums/rr293/ms460woodchuck/saws034.jpg" border="0" alt="Photobucket"></a>
<a href="http://s493.photobucket.com/albums/rr293/ms460woodchuck/?action=view&current=saws035.jpg" target="_blank"><img src="http://i493.photobucket.com/albums/rr293/ms460woodchuck/saws035.jpg" border="0" alt="Photobucket"></a>

 

[wigglesworth]

I need a clutch cover for an old homelite XL-123. PM me if you have one. Buddy bought one, but its for a VI-123.

 

[willis09r]

Looking for Pro Mac 610 chain and felling dawgs/spikes whatever they are...

It was a barn find and it's loud as ####, but I need at least a chain(20") to try
it out, and the dawgs to make it look cool. Thanks!

 

[s13rymos]

I know this is a long shot but i need a recoil for a Orline mustang :chainsawguy:

 

[yo2001]

Looking for a set of seals for 026. I have a part 026, whole bunch of stihl trimmers parts, br420 parts, and few other things.

 

[HittinSteel]

Need an 029/039 muffler (just the actual housing, I have the gasket, bolts and front piece). Have a couple stihl bars, file guides and ? or some $ to trade.

 

[StihlGuitar]

026 seals

Looking for a set of seals for 026. I have a part 026, whole bunch of stihl trimmers parts, br420 parts, and few other things.

I have an 026 crankcase with good bearings, the rod is just bent.