Swap meet...

[Evan]

looking for cheap 440 044 flippy cap tank or even possibly a parts saw 100 bucks or less.

 

[William Balaska]

i have a ms660 big bore with a mild muffler mod that i would be interested in trading for ?? let me know what you got

I got a wild thing plus a hundred and fifty bucks

 

[plumbcrazyjr]

I got a wild thing plus a hundred and fifty bucks

probably have to pass on that but thanks anyway

 

[valekbrothers]

Anyone need 394xp parts? Echo 3450 parts?

PM me a list of 394 parts you have............

 

[Saw Dr.]

Need Stihl 015 front handle, and air filter. Have lots to trade.

 

[Arrowhead]

P51 western spikes

Im looking for a set of Pioneer P51 Western spikes and a clutch cover with a chain brake. Anybody got them???

 

[Stihl051master]

I'm in need of a good tank/handle and a cover plate for behind the clutch for a Stihl 038, or would be interested in a complete parts saw.

I also need an air filter cover for a Stihl 024AVS.

I also have a Stihl 051 that I redid that I may consider trading for a running 038 MAGII, 044/440 MAG, 046/460, or 066/660. If anyone is interested in details PM me. Saw has a new 25" bar and chain.

Here's some pics of the 051:

 

[cbolyard]

looking for cheap 440 044 flippy cap tank or even possibly a parts saw 100 bucks or less.

I still have the 440 flippy cap tank I chatted with you about earlier.

 

[Steve K]

034 handlebar

I'm still looking for a 034 handlebar..

 

[StihlGuitar]

034 or 036 cylinder boot

I'm looking for the rubber boot that connects the carb to the cylinder for an 034 or 036 (its for an 034 Super) Also need an oiler for it as well as bar tensioner. I have Stihl parts for trade or cash. Thanks.

 

[cleaf30]

I'm looking to buy a pioneer 600, 600A, or 610 gas cap if anyone willing to sell.

 

[MS460WOODCHUCK]

I have 3 bars to deal. The first one is a Stihl ES 36'' 404' for a 088/880 with only 3 tanks of fuel ran with it, it comes with 2 chains, both chains are woodland pro full chisel the full comp has been sharpened with a file 1 time and the skip has never even been on a saw. The second bar is the original 41'' .404 to a 088 with a stihl full chisel that has never been sharpened. The sprocket tip on the 41'' is just a little loose not bad though I would run it with no worries. The third bar is a 42'' windsor duratip (hardnose) for a poulan 5400, pp505 and I think it will fit huskies too. The code on it is 42HU63 this bar has only had one tank of fuel ran with it and the full chisel stihl chain. Most of the red paint being off is from cleaning it with carb cleaner.
<a href="http://s493.photobucket.com/albums/rr293/ms460woodchuck/?action=view&current=saws044.jpg" target="_blank"><img src="http://i493.photobucket.com/albums/rr293/ms460woodchuck/saws044.jpg" border="0" alt="Photobucket"></a>

 

[djmercer1]

i have a 41" rollomatic stihl bar. bar orginally was was setup for 404, but tip was changed at dealer. it has a loop of stihl ful comp 3/8 .058 (~160 links) that has never been sharpened. chain has a has a couple of hours run time, bar is in fair cosmetic shape, but is perfect otherwise... i also have a little used stihl p#ber 4308-641-5300, original auger asembly for stihl 08s, among others

interested in partial trades on a stihl 08s oil tank assembly, parts to change stihl 08s powerhead into a ts350, 048/042 piston/cylinder, or 076 piston/cylinder....

dave

 

[john taliaferro]

cheak is in the mail

money sent thanks againjohn. john t :greenchainsaw::greenchainsaw:

 

[Meadow Beaver]

044/440 parts

I jave lots of 044 and 440 parts, PM me for more info.

 

[Bowtie]

034/036 clutch cover

I could use a clutch cover for my 034, and a decent air filter. I have lots of misc. stuff to trade and cash.

 

[rahtreelimbs]

I have a new air filter for a Stihl 361. PM me if interested!

 

[yo2001]

I have a husqvarna Ignition coil for 55, 272 etc I want to trade for Stihl dawg or something else.

 

[Saw Dr.]

I have a husqvarna Ignition coil for 55, 272 etc I want to trade for Stihl dawg or something else.

What Stihl dawg do you need, Yo?

 

[yo2001]

What Stihl dawg do you need, Yo?

Outer dawg for a 064. I think it's the smallest of big dawg if that make sense. I'll get the part number tomorrow.