Swap meet...

[Mastermind]

Ok guys...not sure if there is any demand or not. I am just not interested in fixing these two old saws right now. I bought them on impulse , you know how it is.

I have a Mac 2-10. I have cleaned it up completely. It ran some, but I think its got an air leak. Heck I spent 12 dollars on brake cleaner to get the gunk off.

The other is a Homelite 101, its missing a muffler and a coil wire. I am not sure what I need, I am rebuilding a 029, heck let me know what you have. I can send pictures .

I would be interested in the 2-10 shoot me a pm so we can hook up for pics.

 

[thomas1]

Yes. Perfectly functional

If Ron is not interested, and it will fit a Super Wiz55, I am.

 

[Arrowhead]

I looking for a set of spikes for a Partner 5000.

 

[67L36Driver]

Carb/air filter cover for Tophandle

Anyone have a carb/air filter cover for a Craftsman 358.355162 1.8 cu in tophandle.

Have a good runner from the pile and that's the only thing missing.
View attachment 169748
Sears gets $12 plus shipping and I don't think it comes with the choke knob or the screws etc..

Have lots of 2150(ish) parts or a junk Craftsman 355.355061 powerhead (missing the cover, natch) to trade.

T.I.A.
Carl

 

[DSS]

I looking for a set of spikes for a Partner 5000.

Funny thing happened today. I been looking for a 5000 for parts, I need a handle for my 500 which is cracked. I put an ad up last week but no hits.

Today a good buddy of mine walks in with a 5000 in a box, says it blew up about 15 years ago and it's been in his fathers basement ever since. There is a nick out of the piston but not a mark on the jug, so i don't know what happened to it yet.

Anyway, I got my handle plus a parts saw for free.....SCORE!

I don't know if there is a spike on it or not, but if so, it's yours Ed. I'll look tonight, I'm not home right now.ray:

 

[jerrycmorrow]

Funny thing happened today. I been looking for a 5000 for parts, I need a handle for my 500 which is cracked. I put an ad up last week but no hits.

Today a good buddy of mine walks in with a 5000 in a box, says it blew up about 15 years ago and it's been in his fathers basement ever since. There is a nick out of the piston but not a mark on the jug, so i don't know what happened to it yet.

Anyway, I got my handle plus a parts saw for free.....SCORE!

I don't know if there is a spike on it or not, but if so, it's yours Ed. I'll look tonight, I'm not home right now.ray:

oooorah. good fer ya.

 

[chainsawwhisperer]

Anyone have a carb/air filter cover for a Craftsman 358.355162 1.8 cu in tophandle.

Have a good runner from the pile and that's the only thing missing.
View attachment 169748
Sears gets $12 plus shipping and I don't think it comes with the choke knob or the screws etc..

Have lots of 2150(ish) parts or a junk Craftsman 355.355061 powerhead (missing the cover, natch) to trade.

T.I.A.
Carl

I'm sure I have one, I'll let you know. Black or lime green?
Jim

 

[whitebutler]

I'm lookin for full wrap bars for a husky 394xp and starter side cover I have lots of 288 parts for trade if anyones open and have 372xp crank still in case it looks great but wouldn't run after i got it out from under a big sugar pine....:check:

 

[sachsmo]

Need a .375 110 link bar for big Husqvarna,

Have some stuff, what ya need?

 

[caleath]

I would be interested in the 2-10 shoot me a pm so we can hook up for pics.

you have a pm

 

[forestryworks]

I need a standard 066 muffler cover. Not the DP.

 

[Eccentric]

Funny thing happened today. I been looking for a 5000 for parts, I need a handle for my 500 which is cracked. I put an ad up last week but no hits.

Today a good buddy of mine walks in with a 5000 in a box, says it blew up about 15 years ago and it's been in his fathers basement ever since. There is a nick out of the piston but not a mark on the jug, so i don't know what happened to it yet.

Anyway, I got my handle plus a parts saw for free.....SCORE!

I don't know if there is a spike on it or not, but if so, it's yours Ed. I'll look tonight, I'm not home right now.ray:

Good deal Chris! Sometimes the sun shines down on us (even you hosers in Canada eh).

I had similar luck (although it did cost me a few bucks) today. My low-bucks ebay Homelite EZ-6 shortblock came in this afternoon. Looks better than expected (for a change). Between it and my smoked P/C Original EZ I oughta be able to get that badboy together. Just gotta scare up/make some gaskets, and maybe get a set of rings (P/C look great) and a flywheel cover for it to be complete. Love those old saws.

There's a Pioneer X100 (at least that's what the seller calls it) with a 22" bar for sale for $75/obo somewhat near me. Looks like it was 'strongly influenced' by a Homelite XL12. It's a bit of a drive, but I can pick it up for you if you're really interested (I need to go to the same town to pick up an old McCulloch). PM me for the guy's phone # if you want. Didja ever find a good useable Super E-Z P/C set that you can part with? No hurry....

 

[DSS]

Good deal Chris! Sometimes the sun shines down on us (even you hosers in Canada eh).

I had similar luck (although it did cost me a few bucks) today. My low-bucks ebay Homelite EZ-6 shortblock came in this afternoon. Looks better than expected (for a change). Between it and my smoked P/C Original EZ I oughta be able to get that badboy together. Just gotta scare up/make some gaskets, and maybe get a set of rings (P/C look great) and a flywheel cover for it to be complete. Love those old saws.

There's a Pioneer X100 (at least that's what the seller calls it) with a 22" bar for sale for $75/obo somewhat near me. Looks like it was 'strongly influenced' by a Homelite XL12. It's a bit of a drive, but I can pick it up for you if you're really interested (I need to go to the same town to pick up an old McCulloch). PM me for the guy's phone # if you want. Didja ever find a good useable Super E-Z P/C set that you can part with? No hurry....

Thing about that pioneer is that shipping it to me would double the price probably. A p51/61 series I would bite on though.

I started out to the shed the other day to look for your p/c and when the snow got to my nutz I turned around. I have to go and get two things there now though, so pretty soon. Another snowstorm coming tonight....hopefully by the weekend I will make the journey. Thought I had one in the garage but it turned out to be an xl-12. I haven't forgotten anyway.:glasses-cool:

 

[firefighter33]

I'm lookin for full wrap bars for a husky 394xp and starter side cover I have lots of 288 parts for trade if anyones open and have 372xp crank still in case it looks great but wouldn't run after i got it out from under a big sugar pine....:check:

U got a PM

 

[67L36Driver]

I'm sure I have one, I'll let you know. Black or lime green?
Jim

ModifiedMark has me covered it looks like. I may get back to you.
Thanks much.
Carl.

 

[volks-man]

need an 18" bar in 3/8 0.50.
any brand, new or used, sprocket tip, in serviceable condition for a poulan.
oregon numbers k041 or k095 (k095 = small mount husqvarna).

will trade stihl 020av parts, an 18"ish big mount (088, s10) bar for stihl in 3/8, homelite 340/54 parts, some small 066 parts, OR???

 

[Jacob J.]

Rich-

You have a 440/044 intake boot on the way via first class mail.

Ed-

I think I have a set of stock 5000 dawgs you can have, I'll dig through the box tonight.

I also need a 394 full-wrap handlebar if anyone has one available. I'm getting ready to ship a replacement 394/395 to a cutter here that had one stolen back in November.

 

[roncoinc]

Yes. Perfectly functional

I could use it but somebody asked if it would fit a super wiz...they may need it more than i . i think the size is common and more may fit.
put me second and check with them first..then let me know.
Tnx.

 

[roncoinc]

Thing about that pioneer is that shipping it to me would double the price probably. A p51/61 series I would bite on though.

I started out to the shed the other day to look for your p/c and when the snow got to my nutz I turned around. I have to go and get two things there now though, so pretty soon. Another snowstorm coming tonight....hopefully by the weekend I will make the journey. Thought I had one in the garage but it turned out to be an xl-12. I haven't forgotten anyway.:glasses-cool:

LOL ! i did the same thing the last couple of days..
then shovel down to get under the shed,only four foot hi,got the parts tho !!

 

[volks-man]

Rich-

You have a 440/044 intake boot on the way via first class mail.

Ed-

I think I have a set of stock 5000 dawgs you can have, I'll dig through the box tonight.

I also need a 394 full-wrap handlebar if anyone has one available. I'm getting ready to ship a replacement 394/395 to a cutter here that had one stolen back in November.

ladies and gentlemen,
jacob j. is a class act!