Swap meet...

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I bee's in kneed ub uh tree fiddy seben xpee intake, carby and filter. Purdy shore a tree fiddy 9 wood wurk 2. Gots TUNS 2 swaap....or Greeen.....

Translation!
I be needing some ol' orange turd parts for a 357xp carb and filter.
Pretty sure a 359 would work.
Got lots to trade, jar of moonshine, opossum road kill (fresh) and a fat woman I met at the family reunion!
:laugh: I love being a hick.

Sent from my LS670 using Tapatalk
 
Got some Husky stuff up for trade. Everything is new except the one starter cover and the p/c.
Things I need are.... Stihl 290/310/390 clutch assembly and a used airfilter for the same. Good 036 or 034 p/c. Muffler for Skil 1645. Decent blue xl12 shortblock. Stihl 020avp rear handle top cover piece and clutch cover for same.


IMG_4799.jpg


IMG_4800.jpg


IMG_4801.jpg


IMG_4802.jpg


IMG_4803.jpg


IMG_4804.jpg


IMG_4805.jpg


IMG_4806.jpg
 
Not sure what this top is from. It's dirty, but in great shape. There is a bolt broke off in the exhaust port hole. Somebody tried to remove it and buggered up the flange a little. Can be easily fixed with a flat file. 48mm

IMG_4807.jpg


IMG_4808.jpg


IMG_4809.jpg


IMG_4810.jpg


IMG_4811.jpg
 
Not sure what this top is from. It's dirty, but in great shape. There is a bolt broke off in the exhaust port hole. Somebody tried to remove it and buggered up the flange a little. Can be easily fixed with a flat file. 48mm

Husky 61
 
This is a long shot. Anybody have a clutch cover for a 288xp? Picked up the entire saw for $16, mechanically in great shape, but it's a bit ugly.

This was the clutch cover it came with. Yes, that is a piece of wood that was holding the bar on. Yes they were using it that way.
288clutchcover001.jpg
 
Last edited:
This is a long shot. Anybody have a clutch cover for a 288xp? Picked up the entire saw for $16, mechanically in great shape, but it's a bit ugly.

This was the clutch cover it came with. Yes, that is a piece of wood that was holding the bar on. Yes they were using it that way.
288clutchcover001.jpg

That's awesome. :rock:
 
This is a long shot. Anybody have a clutch cover for a 288xp? Picked up the entire saw for $16, mechanically in great shape, but it's a bit ugly.

This was the clutch cover it came with. Yes, that is a piece of wood that was holding the bar on. Yes they were using it that way.QUOTE]

I dont have a genuine clutch cover but I have a piece of replacement wood.:hmm3grin2orange:
 
I think I hurt their feelings a little bit with the whole "what kind of idiot would think this is a good idea" rant.
 
This is a long shot. Anybody have a clutch cover for a 288xp? Picked up the entire saw for $16, mechanically in great shape, but it's a bit ugly.

This was the clutch cover it came with. Yes, that is a piece of wood that was holding the bar on. Yes they were using it that way.


I'd run it. But that's just me.:wink2:
 
Back
Top