Swap meet...

[SawGarage]

Hey fella's
Looking for a Dolmar 6400/7900
Or similar in blue colors! They can be projects.

I have a cut-off saw if your interested.....

 

[gilraine]

i have a complete poulan 361 with no spark and am looking for a flywheel for an 036.

 

[sefh3]

I'm in need of some air filters. Looking for one for a Stihl 026. Intel carb. Also need one for an 036 with intelcarb. PM me if you have one. I have some parts or $$ to trade.

Still looking for one. I need these for non intelcarb.

 

[Brushwacker]

Looking for parts to retrofit a brake on an early 028wb. !

It might be easier/cheaper to find a toasted 028.

Has anybody done that ?
I made an attempt sometime back and found something different on the case on the old version that made it look more complicated then expected so I skipped it.

 

[Jwalker1911]

looking for a 24" .063ga 3/8ths pitch stihl bar,36" 3/8s .063 ga stihl.....have a 30" stihl bar and a complete 026 to trade

 

[67L36Driver]

Homelite Bandit 33cc UT10901A. Need a coil.

SearsPartsDirect lists the dumb thing (coil) for 85 USD. Yikes!!!!

Whole saw ain't worth $8.50 but we will give it a try anyway.

Stuff to trade.

Carl.

Bump.

Also, all the fasteners/screws that hold on the coil, recoil cover and the top lid.

(only the big chunks were in the cardboard box it came in.)

 

[Jacob J.]

Has anybody done that ?
I made an attempt sometime back and found something different on the case on the old version that made it look more complicated then expected so I skipped it.

Yeah the early 028 crankcase was different, and that's why the old brake system wouldn't fit the newer case. They redesigned the case and brake system
and the newer brake system has fewer parts. The old-school brake parts have been NLA from Stihl for years and years.

 

[jockeydeuce]

Has anybody done that ?
I made an attempt sometime back and found something different on the case on the old version that made it look more complicated then expected so I skipped it.

The brake kit for the early 028's are rare as hens teeth.....It has to be the "non crossing" type brake band......They're out there, but not common!

 

[parrisw]

The brake kit for the early 028's are rare as hens teeth.....It has to be the "non crossing" type brake band......They're out there, but not common!

Do you know the part numbers? I could check my parts stock.

 

[jockeydeuce]

Do you know the part numbers? I could check my parts stock.

Will.....Here's the Op's post with part #'s

Looking for parts to retrofit a brake on an early 028wb. These are the #:
1118 160 5400 - Brake band
1118 162 5220 - Bolt
1118 160 5001 - Lever (a)
1118 162 7900 - Coil spring
0000 998 1600 - Spring
1118 162 5002 - Lever (b)
1118 162 5001 - Lever (c)
1117 162 8902 - Washer
1118 792 9100 - Hand Guard
1117 791 6005 - Stud
9078 319 0960 - M5 x 12 screw (2 required)




Or as kit:
1118 007 1002




New to saws and want to make mine safer! Thanks!

 

[mp5n]

Looking for a Shindaiwa 360 saw

I'm trying to track down a Shindaiwa 360 saw with a blown up motor. I picked one up which is missing a lot of parts. but with a good motor. If anyone can help out please PM.

Thanks,
MP5N

 

[Madsaw]

Looking for a rear handle/ tank for a ms440. Got husky parts to trade or cash.
Bob

 

[nstueve]

Wanted

Husky 257 cylinder (got new piston already)

Stihl 029,290, 029 super, 310, 039, 390 muffler (with hardware preferably)

79cc dolmar p&c

PM me if you have any of the above.

Got stihl clam shell stuff... 024 crank case (i think 024...), different bars and chains... misc... or cash.

 

[AU_K2500]

anybody got a husky fuel line....Part number: 501 42 65-01
If not ill just use tygon and some RTV around the hole.

 

[tbone75]

anybody got a husky fuel line....Part number: 501 42 65-01
If not ill just use tygon and some RTV around the hole.

RTV won't hold for nothing.Gas will eat it.You really need the right fuel line.

 

[bplust]

anybody got a husky fuel line....Part number: 501 42 65-01
If not ill just use tygon and some RTV around the hole.

If anything, there are gas/oil seal products. But RTV is a big no-no. For applications where it comes in contact with coolant, it's acceptable, but gas will eat it up very quickly.

 

[AU_K2500]

thanks for the tip fellas. I would like to have the right part too. randy duncan has it on fleebay. 19.00 plus shipping seems high, but it is a fairly rare part. Might just do it to have the right part.

 

[bplust]

thanks for the tip fellas. I would like to have the right part too. randy duncan has it on fleebay. 19.00 plus shipping seems high, but it is a fairly rare part. Might just do it to have the right part.

This MAY OR MAY NOT WORK, but would a fuel line from a Mac 10-10 be acceptable? It seals in the same way you're describing. They still make them and they are plentiful, if your local saw shop doesn't have one, they can order it and you could have it for $10 or under, unless they're gougers.

 

[ndlawrence]

Looking for a good smaller/medium sized saw to pratice porting on. Pm me

 

[Mastermind]

Looking for a good smaller/medium sized saw to pratice porting on. Pm me

Seek the Husqvarna 350............

It's great one to start with.