mp5n
ArboristSite Operative
Looking for Husqvarna 394 / 395 muffler and clutch cover with brake.
If anyone can help out please PM.
Thanks,
MP5N
If anyone can help out please PM.
Thanks,
MP5N
Swap meet...
- Thread starter Four Paws
- Start date
Help Support Arborist Forum:
mp5n
ArboristSite Operative
Cover
What would the cover be including shipping to zip 18974? I'm also looking for a muffler.
Thanks,
Dave
What would the cover be including shipping to zip 18974? I'm also looking for a muffler.
Thanks,
Dave
Looking for a orange recoil for a Echo CS341. Got stuff to trade ! TIA
Finally got a look at all these bars I got and got the ones put aside I want to keep.
Got tons of small mount Homlite bars, from 14-24" some sprocket nose but alot of hardnose.
Lots of Homelite Perma hard tipped bars for the C series ect in 17, 21, and 25".
Quite a few 14 and 16" bars branded skil but will work on any of the Emab, Trail, Quandra built saws like the small Parter, Skill, Jonsered etc.
Got a few hardnose bars in the early Homlite XL-12 with 5/16" studs and there actually the same as the old Poulan mount for the 306 etc.
There are also quite a few Super XL type mount bars in hardnose and sprocket nose.
Most have some surface rust and are good user bars, not for shelf queens but there are a few mint or near mint bars.
Probably looking for paper for most of these, but lots of paper probably wont be involved.
Got tons of small mount Homlite bars, from 14-24" some sprocket nose but alot of hardnose.
Lots of Homelite Perma hard tipped bars for the C series ect in 17, 21, and 25".
Quite a few 14 and 16" bars branded skil but will work on any of the Emab, Trail, Quandra built saws like the small Parter, Skill, Jonsered etc.
Got a few hardnose bars in the early Homlite XL-12 with 5/16" studs and there actually the same as the old Poulan mount for the 306 etc.
There are also quite a few Super XL type mount bars in hardnose and sprocket nose.
Most have some surface rust and are good user bars, not for shelf queens but there are a few mint or near mint bars.
Probably looking for paper for most of these, but lots of paper probably wont be involved.
SawGarage
Addicted to ArboristSite
I find myself needing a couple husky parts:
445/450 coil (if nothing available permanently, just for testing purposes)
435/440 carb -- someone SMOOSHED the L speed needle... Stays running screwed all the way in....
:bang:
TONS to trade... Parts, bars, chain, good cheer. Etc
445/450 coil (if nothing available permanently, just for testing purposes)
435/440 carb -- someone SMOOSHED the L speed needle... Stays running screwed all the way in....
:bang:TONS to trade... Parts, bars, chain, good cheer
. Etc
Last edited:
Mark, do any of the hard nose bars fit an xl 925 ?
Yes they do. How about a 30"?
I forgot to specifiy: 24-25". A farmer from San Pierre area told me he can't find hardnose 25" any more, so I've been watching for him.
Duke Thieroff
Fill your hands, you SOB!
757 Shinny...
Has some hardware issues that can be fixed easily by inserts....Other than that a good running saw.
Trading for saws or a pocket full of dubs.....
Duke Thieroff
Fill your hands, you SOB!
Thought I'd give everyone a crack at this stuff here before I move it along otherwise...
Makita DCS 52, I believe. Seems to run good, but would certainly benefit from a fuel line replacement and a carb kit.
It is in fair shape but needs the bar studs repaired. It seems the original owner was quite the ham fist and literally pulled the bar studs out of the case. I have one of the bar studs, you'll need the second one. There is a crack in the upper handle bar mount cover. Oiler seems to work, but the oiler line appears to be missing something, likely a small metal tube (I haven't looked at the IPLs). You can see in the pics, I believe.
[video=youtube;ddd1IpXLxVE]http://www.youtube.com/watch?v=ddd1IpXLxVE&feature=share&list=UUNTjfw93oY19yAntoj-s1uw[/video]
Will trade for other saws, or American Paper
Let's get it gone
Shove!
nmurph
ArboristSite.com Sponsor
- Joined
- Nov 26, 2007
- Messages
- 16,162
- Reaction score
- 7,166
Thrust...for a Husqvarna 575 piston...
excess650
Addicted to ArboristSite
I think I have a grey one. The recoil from any of the CS3000, 301, 305, 306, 345, 3450, 346 should fit.
michale34
ArboristSite Operative
does anyone have a carb and a coil for a 032 stihl
Looks like I'm in need of a crank for a SP81 if someone happens to have one available. Not much in the way of desirable parts for trade, but have tons of 1127 and Husky 50 series stuff..... and caish.
edit: Never mind. Found one on eBay and just bit the bullet. Ouch!
edit: Never mind. Found one on eBay and just bit the bullet. Ouch!
Last edited:
Don't confuse the old man. Next thing you know you will have chains with the wrong link count and in .058 and bars that you can't remember which saw they fit.
Similar threads
