farmerdoug
ArboristSite Operative
I went to turn the "H" screw back out and realized that I need a special tool to do this. I have 2 earthquake saws and both are the same. What tool do you use?
P.s. Saw starts fine, but will bog down when you hit the throttle. Both saws act the same. I was told that the H screw is turned in too far and needs to come out a little.
Thank you for any insight you may have on this.
P.s. Saw starts fine, but will bog down when you hit the throttle. Both saws act the same. I was told that the H screw is turned in too far and needs to come out a little.
Thank you for any insight you may have on this.