What saws do you have and what did you pay?

[alderman]

Homelite XL-12- Hand me down from Father in Law
Homelite 300- Hand me down from father
Shindaiwa 500-Used $100.00
Shindaiwa 488-Slightly used $202.00 from e-Bay.

I also have access to my step dad's Stihl 045 which comes out for the big stuff.

 

[slipknot]

Husqvarna 455 rancher 20" bar $323+ 2 extra free chains (ebay thru norwalk)
Husqvarna 345 16" bar $260
Craftsman 55cc 316.350840 18" bar $210 can't figure out who make this one!
craftsman 36cc 358.350660 16" bar $45 actually a poulan(pull-on)
poulan 2000 33cc 14" this saw sucks horribly!! actually they all do except my huskys and my black craftsman 55cc. I claim the 455 rancher the best saw out there for the money JMO.

 

[Chopwood]

036 Stihl- $275 new
365 Husky- Free, from timbersports sponsor
394 Husky- $125 used
3120 Husky- $350 used
3120 Husky- $875 new
3120 Husky Varney Modified- $1000 used, $300 rebuild, In the EHP shop right now for it's second, haven't got the bill yet.
3120 Husky EHP racesaw- $2200 used, In the EHP shop for an update right now.
325 RLE Rotax- $3500, plus pipe updates for $150

 

[buckwheat]

044, 25": $300 used. $150 to get it running. $150 for the new top end. $70 for a new coil. It's finally running half decent.
6401 25": $240 lightly used. eBay special. Great saw although I'd like to trade up to a 7900 for the amount of oak that I cut. Very tough built unit.
026Walkerized, 18": $500. A real screamer for 90% of my cutting.
3450, 16": $200 new on eBay with the case. Impressive little saw. I don't like the Intenz chain tightener and will probably drop to a 14" bar someday. Gave the case away.

 

[Lawn Masters]

Stihl 024, $40 from AS member.
Jonsered 70 $150 from AS member
Jonsered 670, traded 064 for it.

 

[brent denny]

Husqvarna 353-new $369.00 from local dealer.
Husqvarna 372xp new-around $575.00 or something like that from southwestfastener. As much as I like to support my local dealer, I just couldnt justify paying seven hundred dollars plus tax for the same saw.
Shindaiwa 488-$329.00 I found a dealer using the shindaiwa website locator that was willing to work with me. That was a pretty good price for that saw.
This is what I currently have. I wont embarrass myself by listing all of the saws i've bought, sold, traded, etc. in the past just because I wanted to try something different out.

 

[NWCS]

well.. the saws i still own:

Husqvarna 181se: $25 (needed rings, handlebar and carb kit)
Echo CS-8000: $168 (ebay, needs chain)
Husqvarna 2100: $100 (needed muffler, starter, coil, clutch cover, bar, chain)
Homelite XL-12: $50 (stripped and waiting on crank bearings)
Homelite EZ: $20 (from Dean, only needs carb kit)

the rest of my saws had to be sold off to pay debts.

the 181 and 2100 and the EZ are in Dean's shop, and the echo is not here yet.. sucks not having any saws.. in hand..

 

[Stihl Crazy]

Stihl MS 260 - $550 new
MS 361 - $650 new,plus cost of EHP woods mod
064 - $400 used
088 - $800 new,plus cost of EHP woods mod

Husky 346 - $675 new, plus cost of EHP woods mod
262 - $50 used
181 - $80 used

Redmax G5000- $ 500 new

 

[whatsnext]

044 24" 175.00 needed good fuel
036 20" 165.00+25.00 in parts
MS290 20" traded a nice used 023 that I had about $100 in.
Homelite CS-50 $17.00 + $20.00 for air filter and rings.

 

[superman_36]

Echo cs-3000 65.00 needed clutch
Echo cs-3450 50.00 guy needed money
Echo cs-4600 85.00 Ebay
Echo cs-5500 60.00 Ebay last week
Echo cs-670 125.00 Brand new rich client did not want it
Echo cs-8000 75.00 Ebay unknown condition new plug and gas fired up
Husky 136 15.00 Plus used cylinder and piston 30.00 = 45.00
Husky 288 100.00 ebay frustrated seller
Husky 371 130.00 ebay
Jonsered 2083 25.00 ebay needed new rings and carby runs
Jonsered 2077 25.00 ebay need rings and chain break
Homelite 1020xp 130.00 ebay needed bar and chain
Solo Rex 125 135.00 ebay
McCulloch super55A 40.00 Old man connection
McCulloch 250 25.00 Flea market
David Bradley 5.00 ebay
Homelite super xl 30.00 Old man connection
Sachs Dolmar 166 55.00 Old man connection
Pioneer 14-20 9.00 estate auction
Stihl 056 bow free Pops hates bows
Poulan To Many to list

 

[spacemule]

• Husqvarna 394xp. $200 at a pawn shop--$10 to fix everything wrong with it: kill switch wire and a new brake band.

• Stihl 034 $145 Ebay. $3 for a new chain adjuster.

 

[Cut4fun]

Poulan 330 ebay used $55 sold as parts saw, needed carb tuning and open up muffler,like new now. Runs great. Best deal so far for me.
Poulan 3750 ebay used $148 needed ring and base gasket another $16.
Poulan 2000 bought new $100 11 years ago. Best homeowner limber saw I have had. No probs in 11 years,8lbs top handle, great for purpose it was made for.
Poulan 2250 gave to me. Using as a parts saw for others.

 

[ozflea]

If i told you's what i paid for mine i would be needing a truck load of ammo to to keep you's all quite.

Mc Bob.

 

[Lawn Masters]

Bob, if we even knew how many saws you actually have, you'd have to kill us all.

 

[gatkeper1]

Echo CS3450,CS5000,CS452VL
John Deere 50V
Redmax G415AVS,G561AVS
Husqvarna 266SE,266XP,272XP,394XP
Jonsered 670 Super,361
Homelite Super EZ AO,XL925,XL,XL2
Pioneer Farmsaw ll
McCulloch Power Mac 6,PM310,Mac 15, 250,Titan 50,10-10,
ProMac 72,SP81,SP125C,SP125 w101B power,
Poulon Pro 262
Wright 70,GS-5020,GS-2520
Lombard 70
Clinton D35,D55,D65
O&R Challenger Mark ll
Ford Eagle ll
Frontier Mark l
Skil 1614,1616,944,1631
PM Canadian 270
and there is a few more. at last count there was a total of 65

 

[CNYCountry]

Stihl MS361, $570 w/20" bar and extra RS chain. Believe the hype, as far as I'm concerned. A fine machine.
Homelite 360, $100 as a gift for me. Haven't even bothered to get it running right but I will soon.

 

[Max]

Husky 141 $25.00 Lowes parts saw took $45.00 to get it running
Husky 340 $140.00 Lowes parts saw, tuned carb good to go
Husky 357xp $ 530.00 new from local dealer
John Deere 55v gift from father
Remington SL5 gift from grandfather (one nasty saw!)
Homelite XL-12 given for work done at frinds house

others have come and gone, I like these the most.

 

[chainsawworld]

my ex-wifes lawyer showed up to the divorce table with an estimate from someone for the saws they were able to find. he claimed i had over $30,000 in chainsaws. i am glad i only bought one used 026 for $50.00 for her to compete with the entire time we were married. marty

 

[tony marks]

modded 372 henry special . 962 olympyk niager special. 026 henry special. ,cs 3000 climbing saw.. doubt ill be buyin anymore. but it was a lot of fun getting just what i think i need.

 

[Patrick62]

some old stuff

Latest was the 046, $800 ( nice)
less than perfect 041 (it runs real nice) handed down...
echo cs 3400 (works well enough) $200

and the museum pieces:
Really old Montgomery ward monster. Fairly heavy, but it runs.

The big ball breaker is a Remmington SL-5. Very heavy, it also runs, but I am not big enough to operate this thing for very long.

Both the antiques use a rare 7/16 chain. So I do not cut much with them.