Vintage Chainsaw Collectors Lounge

[heimannm]

I am trying to help out someone that was sent to me by a local Stihl shop...looking for a complete Walbro carburetor from a Homelite 360, what he needs are the throttle arm and screw as he somehow managed to lose his.

Thanks for any assistance.

Mark

 

[s sidewall]

If, I mean if you find a Poulan 8500 in great shape cheap, jump on it. The right person will pay some $ for it.

Steve Sidwell

 

[s sidewall]

Of course I enjoy collecting my green saws. I need to make some time to get three more going that have been sitting on a pallet collecting dust.

Steve Sidwell

 

[Marine-piper]

I am trying to help out someone that was sent to me by a local Stihl shop...looking for a complete Walbro carburetor from a Homelite 360, what he needs are the throttle arm and screw as he somehow managed to lose his.

Thanks for any assistance.

Mark

https://www.leonschainsawpartsandre...Chainsaw_Carburetor_Mounting_Screw_88025.html

https://www.leonschainsawpartsandre...0_Chainsaw_Throttle_Linkage_Rod_12078-1A.html

Homelite collector in training [emoji879]

 

[cbfarmall]

Traded for this. Wanted one for quite a long time. I really have to find a Super 880 now. Had my hands on one of those this summer and it is pretty awesome.

 

[Kensie1988]

Traded for this. Wanted one for quite a long time. I really have to find a Super 880 now. Had my hands on one of those this summer and it is pretty awesome.

View attachment 762291 View attachment 762292 View attachment 762293

That's definitely a good looking saw, I love how Remington designed their saws in the 60's!

Sent from my E6810 using Tapatalk

 

[Yukon Stihl]

Traded for this. Wanted one for quite a long time. I really have to find a Super 880 now. Had my hands on one of those this summer and it is pretty awesome.

View attachment 762291 View attachment 762292 View attachment 762293

Any chance that you may have or know someone that has a clutch cover for a 990? i need one. Thanks

 

[Jay Hansen]

I am trying to help out someone that was sent to me by a local Stihl shop...looking for a complete Walbro carburetor from a Homelite 360, what he needs are the throttle arm and screw as he somehow managed to lose his.

Thanks for any assistance.

Mark

Mark, I think I have a complete parts saw, if you still need this text me and I'll get it out to you.

 

[brandonstc6]

Yesterday at auction, I got a nice Stihl 038 magnum, a Stihl 034 super that’s ugly but has compression and 12 cut off saws aka concrete saws.


Sent from my iPhone using Tapatalk

 

[Marine-piper]

Heading out to get this Homelite 26LCS
UPDATE:The saw was seized and not in that good of shape for the firm price.

Homelite collector in training [emoji879]

 

[cbfarmall]

Any chance that you may have or know someone that has a clutch cover for a 990? i need one. Thanks

Super 754 clutch covers fits perfect.

 

[Marine-piper]

Well the Homelite 26 lcs was a bust, was seized because the guy had it on his front porch for 15+yrs as a display pc.

Homelite collector in training [emoji879]

 

[s sidewall]

$5 parts saw.

Steve Sidwell

 

[cbfarmall]

Super 990 in pieces. I have the wrong piston rings and I want to replace the wrist pin bearing. I already have new main bearings and clutch drum bearings. Based on measurements, I discovered that Pioneer 650 big end needles are the same size and should sub for the unobtainium Remington parts. Cylinder fins were kind of plugged when I took it apart.

 

[s sidewall]

I say that cylinder is caked full. Inside looks clean on the case.

Steve Sidwell

 

[cbfarmall]

I say that cylinder is caked full. Inside looks clean on the case.

Steve Sidwell

The case looks clean because I scrubbed it. A little mineral spirits and air does wonders.

Chris B.

 

[fossil]

Looks good Chris.

 

[Kensie1988]

Super 990 in pieces. I have the wrong piston rings and I want to replace the wrist pin bearing. I already have new main bearings and clutch drum bearings. Based on measurements, I discovered that Pioneer 650 big end needles are the same size and should sub for the unobtainium Remington parts. Cylinder fins were kind of plugged when I took it apart.View attachment 762613 View attachment 762614

You going to re paint it like the PL-5 I sent you? That saw turned out great.

Sent from my E6810 using Tapatalk

 

[cbfarmall]

You going to re paint it like the PL-5 I sent you? That saw turned out great.

Sent from my E6810 using Tapatalk

No. I think it'll clean up fine. That PL6 was a real 'special' case. Paint was not an option.

Looks good Chris.

Thanks Tim. A recently retired mutual acquaintance agrees.

Chris B.

 

[Kensie1988]

No. I think it'll clean up fine. That PL6 was a real 'special' case. Paint was not an option.



Thanks Tim. A recently retired mutual acquaintance agrees.

Chris B.

Ahh I gotcha, she will look good regardless!

Sent from my E6810 using Tapatalk