Swap meet...

[bowtechmadman]

Lookin for a piston and cylinder for 262XP...have a beat up 262 that is getting very low on compression. Have a couple project Johnny 49SP's as trade bait. Both have great P/C's need fuel lines and carb rebuilds.

 

[litefoot]

Lookin for a piston and cylinder for 262XP...have a beat up 262 that is getting very low on compression. Have a couple project Johnny 49SP's as trade bait. Both have great P/C's need fuel lines and carb rebuilds.

I came across this the other day...if it helps any.
http://www.mfgsupply.com/m/c/44013.html?id=LwJk4wwq

 

[yo2001]

Looking for the real big and medium big outer dawgs for Stihl 044/066. Thanks

 

[pl_wrnr]

Ms660

I have a used jug and piston for a660 there in great shape took off a running saw:greenchainsaw: what you got

 

[79stingman]

I am looking for a recoil/fuel tank assembly for a Stihl 040/041.

Thanks,
Ryan

 

[fredmc]

394 husky

View attachment 99715

View attachment 99713

View attachment 99716

View attachment 99714

View attachment 99717

I just got my hands on a 394 husky. It's complete, with no scoring on P&C. I'll take best offer or best trade.
I also have two parts saw stihl 020's for trade, most of all the parts for a j-red 2071 and lots of Dolmar 111/115 parts (pm me with what you need). pics attached.

 

[fredmc]

View attachment 99715

View attachment 99713

View attachment 99716

View attachment 99714

View attachment 99717

I just got my hands on a 394 husky. It's complete, with no scoring on P&C. I'll take best offer or best trade.
I also have two parts saw stihl 020's for trade, most of all the parts for a j-red 2071 and lots of Dolmar 111/115 parts (pm me with what you need). pics attached.

Well y'all the 394 is gone but I still have the j-red parts and Dolmar parts.

 

[doc874]

Husky 288/281

Looking for a good Husky 288 cylinder, and clutch cover with working chainbrake. I'd take a good muffler too. I have Husky 61 parts and some stihl 034/036 parts to trade or can purchase items as well.

 

[fredmc]

Looking for a good Husky 288 cylinder, and clutch cover with working chainbrake. I'd take a good muffler too. I have Husky 61 parts and some stihl 034/036 parts to trade or can purchase items as well.

Hey I haven't forgot about you I just haven't been able to make it out to the dealer. I'll be there Saturday and I'll try to pick up another cylinder for you. I couldn't locate the clutch cover or chain brake though. What kinda shape is the 61 in?

 

[Trigger-Time]

Looking for a good Husky 288 cylinder, and clutch cover with working chainbrake. I'd take a good muffler too. I have Husky 61 parts and some stihl 034/036 parts to trade or can purchase items as well.

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&salenotsupported=true&item=330332541329

 

[doc874]

Hey I haven't forgot about you I just haven't been able to make it out to the dealer. I'll be there Saturday and I'll try to pick up another cylinder for you. I couldn't locate the clutch cover or chain brake though. What kinda shape is the 61 in?

I only have parts for the 61 like carb setups and cylinders etc...

 

[doc874]

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&salenotsupported=true&item=330332541329

Thanks for the link i've asked if they ship to Canada.

 

[doc874]

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&salenotsupported=true&item=330332541329

Well, seller will ship to me but i noticed this cylinder doesn't have the decomp setup. I have two saws to build and have the cylinder and piston from another AS member, they cleaned up well so awaiting a new piston ring for that one. I have an OEM 288xp piston and ring and really only need the cylinder which kinda saves money for a couple of clutch covers, a top cover and a muffler to complete both saws. I still may go the ebay route yet but the AS member will check on availability of a good used cylinder so perhaps i'll wait.

 

[fredmc]

Well, seller will ship to me but i noticed this cylinder doesn't have the decomp setup. I have two saws to build and have the cylinder and piston from another AS member, they cleaned up well so awaiting a new piston ring for that one. I have an OEM 288xp piston and ring and really only need the cylinder which kinda saves money for a couple of clutch covers, a top cover and a muffler to complete both saws. I still may go the ebay route yet but the AS member will check on availability of a good used cylinder so perhaps i'll wait.

I'm going there tonight to check on that and other things

 

[doc874]

I'm going there tonight to check on that and other things

Thanks alot. When i first looked at the 288xp i got, the cylinder and piston didn't look so good through the exhaust port, once apart though i got a better look at them and some Muriatic acid, sandpaper and hone and they will be usable after all its the ring that makes contact with the cylinder wall and i never took any metal off the piston(s) crown so thats still ok. Like i stated earlier, a good used cylinder, muffler, two clutch covers with brakes and one top cover and i'm good to go. I know it'll take time to get these parts together but that makes it more worthwhile.

 

[fredmc]

Thanks alot. When i first looked at the 288xp i got, the cylinder and piston didn't look so good through the exhaust port, once apart though i got a better look at them and some Muriatic acid, sandpaper and hone and they will be usable after all its the ring that makes contact with the cylinder wall and i never took any metal off the piston(s) crown so thats still ok. Like i stated earlier, a good used cylinder, muffler, two clutch covers with brakes and one top cover and i'm good to go. I know it'll take time to get these parts together but that makes it more worthwhile.

Both of my Dolmars 111 & 115 were seized when I got them. Scotch brite and muriatic acid works wonders!

 

[doc874]

Both of my Dolmars 111 & 115 were seized when I got them. Scotch brite and muriatic acid works wonders!

Did you replace the pistons in them?

 

[fredmc]

Did you replace the pistons in them?

Yes I did. I've seized more than one dirt bike in my life. Clean up the cyl+new top end=likenew

 

[fredmc]

395 husky

I have a good cylinder and piston for a husky 395 xp, a stihl 18" bar and a tillotson carb for a 288 xp plus j-red 2071 parts

 

[fredmc]

Mac 250

I got an old mac 250 that I'm looking to trade-it runs has original bar.