Swap meet...

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Wanted 038 full wrap handle, I have a half wrap if needed for a trade and boot maybe other 038 parts. I know its a long shot just got to try.
 
swap meet

Hi all! I need a handle/gas tank for a Shindaiwa 488; also a throttle/trigger and hand guard[white plastic pc]for an Echo 650evl.
I have an Echo 500vl[post recall!] complete up for grabs and lots of older Homelite saws, including a SXL925,SXL, 150auto and an SEZ auto, complete/running. Thanks! J
 
Hi all! I need a handle/gas tank for a Shindaiwa 488; also a throttle/trigger and hand guard[white plastic pc]for an Echo 650evl.
I have an Echo 500vl[post recall!] complete up for grabs and lots of older Homelite saws, including a SXL925,SXL, 150auto and an SEZ auto, complete/running. Thanks! J

I have some Shinny 416 parts, probably no help??? What do you want for the SXL925???
 
Hi all! I need a handle/gas tank for a Shindaiwa 488; also a throttle/trigger and hand guard[white plastic pc]for an Echo 650evl.
I have an Echo 500vl[post recall!] complete up for grabs and lots of older Homelite saws, including a SXL925,SXL, 150auto and an SEZ auto, complete/running. Thanks! J

I have some Shinny 416 parts, probably no help??? What do you want for the SXL925???

Rats. I knew I should have gotten up earlier. Also interested in the SXL925, and maybe the SXL and/or the Super E-Z Auto. Not into 150's...

What other old Homelites do you have to part with?
 
Rats. I knew I should have gotten up earlier. Also interested in the SXL925, and maybe the SXL and/or the Super E-Z Auto. Not into 150's...

What other old Homelites do you have to part with?

Yeah, I missed that post too, I have been itching to get an XL900/925 style saw.
Jim
 
I thought I could stand to leave it be, but I can't stand half assed stuff. I need a pto side case half for a 046/460. The felling dog won't stay attached to JB weld. :cry:
 
Looking for the small round piece that goes between the carb and intake on an 026. PM me please. Need a few ASAP!
I may have some laying around. Are you looking for the brass piece that goes inside the intake or the aluminum one that goes around the outside or both? Please send me a pm with your address and details.
 
Stihl parts

i have no idea what model saws this stuff is from if you see somthing you can use pm me. i will get part numbers if you need them i need husky parts most anything for a 372 also need a chain brake handle for a 262 / 61 / 268
Thanks BILL
attachment.php

attachment.php

attachment.php

attachment.php

attachment.php
 
i have no idea what model saws this stuff is from if you see somthing you can use pm me. i will get part numbers if you need them i need husky parts most anything for a 372 also need a chain brake handle for a 262 / 61 / 268
Thanks BILL
attachment.php

attachment.php

attachment.php

attachment.php

attachment.php

Probably waaayyy late on this, but PM sent.
 
husky 35 / 37 brake handle

Been looking for a while. Haven't found anything on e-bay, no responses to the want ad, so I'll try here one more time. I have a husky 35 in good condition, except for a damaged brake handle. The same handle was used on a Husky 37, I think, as well as a Pioneer/Partner 330/350, possibly others. Not too concerned if it's orange or black, I'd just like it to be there. I could probably fabricate a piece of ABS to do the job, but it'd be nice to have the real thing.

attachment.php

All of the linkage parts are there, and the brake works, just the plastic is pooched. Not much to trade but clams. :)
 
Last edited:
Back
Top