Swap meet...
- Thread starter Four Paws
- Start date
Help Support Arborist Forum:
Warped5
WingNut
ProMac 610 air filter cover needed ....
.... black, with a graphic that has decent quality. Offering parts from PM 610 or clams.
.... black, with a graphic that has decent quality. Offering parts from PM 610 or clams.
Eccentric
Mister Wizard
I've got one. Will check later to see what condition it is in. Haven't really looked at it in years. Saw it in a parts box the other day. I'll get back to you. If I don't in the next day or so............................give me a reminder kick in the butt..
SawGarage
Addicted to ArboristSite
Hey Terry!
hope ya didn't crack one this past weekend! With those chain speeds.... :msp_ohmy:
I should have ya covered... I have quite the 'needs' list...
PM sent..
J
dont know what happened ,im not sure if it was cracked on arrival but ill put a good one on it before i ship it. its not my saw but i take responsibility for its well being.lol inbox was full ,try it again
Last edited:
Blowncrewcab
ArboristSite Guru
I'll give you mine if you need it asap. Let me know, I'll get another...
thanks for the offer ,but they arent in a hurry to get it back.
nmurph
ArboristSite.com Sponsor
Guys, it is my cover that got cracked. If you have one, DON'T send it to Terry. Let me know you have it and we (you and I) will work something out. Terry spent enough time and money on the GTG. He doesn't need to worry about something that happened and that was not from neglect. I have green paper for your part.
Thanks,
Neal
Thanks,
Neal
i have a stihl 880 bar, probably 26 or 27 inches long, i got it when i bought my 660, but it doesn't fit, it is way too big, must fit an 880. if someone needs it, let me know, i would like to trade for a bar i can use, like a 28 inch bar or?? PM me
Homelite XL-101 throttle rod/link.
Part no. 63896-1
Broke near a weld/repair someone made in the past.
Lots of small Poulan parts to trade.
Part no. 63896-1
Broke near a weld/repair someone made in the past.
Lots of small Poulan parts to trade.
Mastermind
Work Saw Specialist
It would also fit a 075, 090 or the 07, 08, and the S10. I could use it for the 08S I'm restoring. I don't have an extra 028" bar though. What would you take for it in green stuff?
Chris J.
Addicted to ArboristSite
Echo CS-520 P&C needed
I've had no luck in the past, but I'll try again--I'm wanting an Echo CS-520 P&C for my Echo CS-440 that has a scored P&C. A CS-440 brake band would also be useful. If you have a crushed 520 and don't want to pull the P&C, I'll take the PHO.
Check out my signature to see what I might have for trade (excluding Ines Sainz
).
I've had no luck in the past, but I'll try again--I'm wanting an Echo CS-520 P&C for my Echo CS-440 that has a scored P&C. A CS-440 brake band would also be useful. If you have a crushed 520 and don't want to pull the P&C, I'll take the PHO.
Check out my signature to see what I might have for trade (excluding Ines Sainz
).
ChainsawmanXX
Addicted to ArboristSite
Hey ya'll
Still have this 647G Sears saw for trade. not getting any spark? Im sure it just needs the points cleaned. Pretty much Brand new B&C on it, Im thinking its 1/2 in chain too! View attachment 188073View attachment 188074
Also have an 039, running great condition. id take some dead presidents or other saws for it. View attachment 188075
Mac3200- dont know much about this saw. needs primer bulb thats all I know lol View attachment 188076
Get back with me. And tell me what you got.
Also needing P&C For a Mac 250. And Cylinder for a C5 and starter pawl.
Still have this 647G Sears saw for trade. not getting any spark? Im sure it just needs the points cleaned. Pretty much Brand new B&C on it, Im thinking its 1/2 in chain too! View attachment 188073View attachment 188074
Also have an 039, running great condition. id take some dead presidents or other saws for it. View attachment 188075
Mac3200- dont know much about this saw. needs primer bulb thats all I know lol View attachment 188076
Get back with me. And tell me what you got.
Also needing P&C For a Mac 250. And Cylinder for a C5 and starter pawl.
bowtechmadman
Addicted to ArboristSite
I have a box o Stihl 066 in excellent condition. I picked it up when I purchased a sawmill as a throw in no the deal. A dealer had stripped it down to the case and told the owner it needed bearings. I will get some pictures posted saw is in excellent condition cosmetically, P/C look good. Bearings/seals are a question no idea if it was pressure tested before being tore down. I found a 660 for an excellent price so this can go. Looking for cash but always interested in partners, husky's, possibly Dolmars.
srcarr52
We can't stop here, this is bat country.
Basket case Stihl... ok, I'll bite. PM sent.
I am still looking for the following....
Ryobi/Redmax/Zenhoh 40cc cylinder (Usable),
Top cover for a Husky 44, and
Husky 65 rear handle (I know it's a longshot)
Ryobi/Redmax/Zenhoh 40cc cylinder (Usable),
Top cover for a Husky 44, and
Husky 65 rear handle (I know it's a longshot)
Last edited:
srcarr52
We can't stop here, this is bat country.
Do you really need a 61 metal rear handle or could you use a plastic tank from a 266, 268, 272 or newer 61?
