Poll: What model for the next AS build off??

[HILLBILLYREDNEC]

Saw

Now that there is some sort of clarity coming to this thread. If a work saw does get porting versus other simple mods which method of cylinder modifications gain the most for performance?

 

[CentaurG2]

Thank gods the aussie brain surgeons are here to keep me on the strait and narrow. Now all we need is the prof to show up and tell me how to run my business in the ”real world”. Oh and no hard feelings mate!

 

[edisto]

Now that there is some sort of clarity coming to this thread. If a work saw does get porting versus other simple mods which method of cylinder modifications gain the most for performance?

Click on THIS LINK

Read it.

When you have finished reading it, read it again.

Then, if you have more questions, start a new thread, or post them in the "Porting 101" thread, but PLEASE stop posting in this one.

 

[edisto]

Thank gods the aussie brain surgeons are here to keep me on the strain and narrow. Now all we need is the prof to show up and tell me how to run my business in the ”real world”. Oh and no hard feelings mate!

They're like ants...

 

[HILLBILLYREDNEC]

So what are the boundary of the build to avoid someone cheating? I am up for a 70 cc saw mod if there is some basic guidelines to go by. Got a few ideas. How mild or wild we going?

 

[Chris J.]

pizzin in the wind, have we figured which saw it will be.

Terry is planning a 046/460 build-off GTGin TN.

Eric Copsey might be hosting a 7900 build-off GTG in OH.

 

[CentaurG2]

They're like ants...

The only use I gots for ants is splitter lube. I must admit, they do a great job.

 

[rms61moparman]

If is I am so dumb, why I have I tried to stay within the work saw area and every else is derailing my posts

DERAILING YOUR POSTS!!!

Boy, You have got one hell of a lot of nerve!

The adults here were trying to conduct an intelligent ADULT conversation about a topic of interest to US.
Then you came along and interjected (look it up) your whining and pulling on our pants leg just like any spoiled brat would do, disrupting our conversation with your STUPID and UNWANTED opinions and then resulting to bald faced LIES and you have the unmitigated GALL (look it up) to accuse someone of derailing YOUR pissy assed, BULLSH!T posts???

Now just like any good father would do, Gary has given you 2 warnings that you are about to get you tail kicked into BANNED CAMP and just like any spoiled little upstart you are insisting on pushing him to see just how far he will let you go.
Don't go crying to Darin when he pulls your pants down right here in front of everyone and spanks you ass like you so richly deserve!!!

I am done with you now..............be gone!!!!


Mike

 

[edisto]

.... and it's not even July yet. I'm impressed. Anyhow, saws anyone? 7900? 460? 346? 440? 361?

Sounds like there's going to be a 7900 buildoff in your neck of the woods.

although on a side note, and it has been mentioned already, but I feel the need to reiterate, This is one of the first times on AS I've seen people who can't agree on water being wet agreeing this guy's a douche.

Define "wet".

 

[HILLBILLYREDNEC]

Who is going to do PNW group? Be interested in hooking up with a few the local guys to do a local built. Just need to make some room in the shop to do the Ms 460 mods.

 

[teatersroad]

.

<iframe width="425" height="349" src="http://www.youtube.com/embed/CNTwi53PVa0" frameborder="0" allowfullscreen></iframe>

 

[Simonizer]

Who is going to do PNW group? Be interested in hooking up with a few the local guys to do a local built. Just need to make some room in the shop to do the Ms 460 mods.

How many different people are running around inside your melon? You have my interest peaked.

 

[GASoline71]

Oblivious...

Gary

 

[HILLBILLYREDNEC]

I have the saw prep and ready now to see how many other local are in the mood to get a PNW saw group together.

 

[AUSSIE1]

Thank gods the aussie brain surgeons are here to keep me on the strait and narrow. Now all we need is the prof to show up and tell me how to run my business in the ”real world”. Oh and no hard feelings mate!

Yawn!

No hard feelings mate!

Yawn!

 

[AUSSIE1]

Thank gods the aussie brain surgeons are here to keep me on the strait and narrow. Now all we need is the prof to show up and tell me how to run my business in the ”real world”. Oh and no hard feelings mate!

They're like ants...

Calling the kettle black?

The only use I gots for ants is splitter lube. I must admit, they do a great job.

Typical example of racism we see from you narrow minded lot. Not surprising.

 

[RiverRat2]

Those 880's must be gutless The pop upped and modded 660 I had or my two ported 390XP's won't walk over my stock 3120 even with a 24" bar - close but no cigar

Self feeding yes but lean into them and not a hope. Unfortunately no matter how good somebody is at porting you'll be struggling to catch 27cc of displacement.

Now if only we could mount a turbo or blower...

Blown/boosted is good!!!!!!!

Oblivious...

Gary

LOLOL!!! U think???????

 

[teatersroad]

thanks for reminding me that i've got better things to do with my time.

 

[HILLBILLYREDNEC]

Blown is good!!!!!!!

Sounds like a challenge:msp_thumbup: There no replacement for big CC and a blower

 

[indiansprings]

I afraid that after your wonderful contributions to this thread, with your obvious profound knowledge, that any AS member in their right mind would run your sorry azz off their property while they were hosting a GTG. The liability would just be too great. You would either hurt yourself or inflict injury upon another individual. If I ever hosted one, and you were to attend I would have an ambulance on site, I'm afraid one of
the attendees would not be as kind as Gary and would result to whatever it took to get the meaningless crap that spews from your lips to stop.
I read your post and realize that even with 26-28% of my brian being eat up with scar tissue, due to the illness I suffer from, that I an truly blessed, that even at 75% capacity I am able to still function at a higher level than some.