Swap meet...

[huskydude]

dolmar 109

I just picked up a real clean dolmar 109. I need an AV mount and an air filter. I need the chain brake guts as the idiot gutted it but I dont think I will get that lucky. 111 and 115 should be the same.

Thanks!!

 

[o8f150]

need a clutch cover/chain brake for my 288xp,, have cash and some parts to trade

 

[rms61moparman]

I just picked up a real clean dolmar 109. I need an AV mount and an air filter. I need the chain brake guts as the idiot gutted it but I dont think I will get that lucky. 111 and 115 should be the same.

Thanks!!

Most parts should still be available for that saw from a dealer methinks!


Mike

 

[diggers_dad]

Chain brake

I just picked up a real clean dolmar 109. I need an AV mount and an air filter. I need the chain brake guts as the idiot gutted it but I dont think I will get that lucky. 111 and 115 should be the same.

Thanks!!

I was just digging around for some other parts earlier today, I'm pretty sure I saw a clutch cover compete with chain brake for a Dolmar 111 / Makita DCS 520i in Makita colors. I can dig it out and take a picture if you think it will fit. I actually remember testing the brake on it and it worked (a couple of years ago).

Shoot me a PM and give me a day or two to find it again and take pics.

DD

 

[MechanicMatt]

I was just digging around for some other parts earlier today, I'm pretty sure I saw a clutch cover compete with chain brake for a Dolmar 111 / Makita DCS 520i in Makita colors. I can dig it out and take a picture if you think it will fit. I actually remember testing the brake on it and it worked (a couple of years ago).

Shoot me a PM and give me a day or two to find it again and take pics.

DD

Ive got it in dolmar 111i, if you want pm me. I just unloaded the P&C on here last week. Looking to get rid of the rest of the 111i parts. I might have a decent AV mount kicking around too. Need a recoil? crankcase? dawg? any thing????

 

[Warped5]

Ive got it in dolmar 111i, if you want pm me. I just unloaded the P&C on here last week. Looking to get rid of the rest of the 111i parts. I might have a decent AV mount kicking around too. Need a recoil? crankcase? dawg? any thing????

'unloaded'?

I'm hurt .... shocked, actually.

I like to think that it 'went to a loving home.'

 

[MechanicMatt]

'unloaded'?

I'm hurt .... shocked, actually.

I like to think that it 'went to a loving home.'

She a runner again, a Makita with a real Dolmar heart! There is a kid at work that goes around on cleanup day and grabs all the two stroke "scraps" then brings them in and we barter. I got that 111i and a 041av off of him in exchange for fixing up his grandpas xl12

 

[MS460WOODCHUCK]

Looking for a good muffler for a 029-039. The one on my saw has 3 rust holes in it and melted the plastic around it pretty good. Shoot me a PM if ya can help me out.

 

[tbone75]

Looking for some MS310 parts.Need a piston,2 sprocket bearings,clip and washer to hold it on and a muffler.I see the post above me needs a muffler too.He gets first dibbs on one! Need 2 useable bars for this saw too.16 to 20 would be nice.May have something you need or that nasty green stuff.

 

[tbone75]

Still needing a on/off switch for a Husky 44. Anyone?

 

[jbighump]

needin a couple bars and chains for ms290 16 18 20 let me know whatcha have dont have to be perfect:msp_wink:

 

[tbone75]

needin a couple bars and chains for ms290 16 18 20 let me know whatcha have dont have to be perfect:msp_wink:

Just want to let everyone know jbighump treated me very good!Thanks again !

 

[tomdcoker]

I have some bars that should fit the 310 or the 290. P M me if interested. Tom

 

[jbighump]

hey no problem it was a pleasure doin business with u thanks for the public recognition:msp_thumbup:

 

[thomas1]

Anybody need loaner saws? I have a few 42cc Poulans that are surplus to my needs.

I have 6-8 of these. Bars and chains on some, all chains are safety chain. If I were keeping the I would put shorter bars and none safety chain on them but, that's just my preference.

 

[Tree Wacker]

Anybody need loaner saws? I have a few 42cc Poulans that are surplus to my needs.

I have 6-8 of these. Bars and chains on some, all chains are safety chain. If I were keeping the I would put shorter bars and none safety chain on them but, that's just my preference.

what are you looking for Thomas? i need a few of them to loan out where i don't have to loan my Stihls and Huskys out to someone.

 

[HittinSteel]

Yeah, post up what your looking for.....could always use a junker to loan to family/friends.

 

[thomas1]

I need an 064 brake handle and dogs, a husky 50 coil, 266/268 chainbrakes x2, a 288xp piston and rings, and a bunch of other random stuff. Whatcha got to offer? Green paper works too.

On edit:

Also on my wishlist is a NWP 066bb kit and a Cox clutch spring.

 

[Tree Wacker]

PM sent

 

[o8f150]

I need an 064 brake handle and dogs, a husky 50 coil, 266/268 chainbrakes x2, a 288xp piston and rings, and a bunch of other random stuff. Whatcha got to offer? Green paper works too.

On edit:

Also on my wishlist is a NWP 066bb kit and a Cox clutch spring.

pm sent,, i have the husky 50 coil