Swap meet...
- Thread starter Four Paws
- Start date
Help Support Arborist Forum:
He's being realistic, and perceptive. I'm an admitted cynic however...
ok you guys are over my head on this word. i took and looked it up and still couldn't understand it. What do that word mean i'm just wondering?
Jon1212
Riff Raff Fart Knocker from other Forum's.
It means someone who is pessimistic by nature............LOL!!!!
He's being realistic, and perceptive. I'm an admitted cynic however...
Me too!
:hmm3grin2orange:
And I agree with Tom as well.
rms61moparman
Addicted to ArboristSite
Well little Pard,
I for one am glad to see you back.
The only way we will ever know if you TRUELY learned anything is if you are here for us to watch.
One of the first steps in your rehabilitation should be to learn how to use spell check!!!
Go ahead...........it doesn't cost a nickel extra!
Mike
OOOh ok thanks for exsplaining it to me.
I'm looking for an 064 parts saw or parts.
For parts I need everything other than what's listed below...
I have a good
-case
-crank
-tank/rear handle
-flywheel
-piston/cylinder
-cylinder cover
-air filter cover
-carb housing
Missing a bunch of little stuff and a carb, clutch cover, flywheel cover, coil, air filter, muffler ect.
So pretty much need a parts saw with a bad crank and bad piston cylinder.
I can trade some parts or PayPal
Thanks if you can help
For parts I need everything other than what's listed below...
I have a good
-case
-crank
-tank/rear handle
-flywheel
-piston/cylinder
-cylinder cover
-air filter cover
-carb housing
Missing a bunch of little stuff and a carb, clutch cover, flywheel cover, coil, air filter, muffler ect.
So pretty much need a parts saw with a bad crank and bad piston cylinder.
I can trade some parts or PayPal
Thanks if you can help
OK mike it's good to be back i'm glad to be back also. I'll make a note to make sure i use spell check before i post anything.
Warped5
WingNut
Jon1212
Riff Raff Fart Knocker from other Forum's.
sorry i didn't mean to sound sarcastic
Stihl 029/290 jug needed
hey guys,
I bought a new 45mm slug thinking my old jug would be good and after reassembly I checked compression and I still only have 110psi. I need a good 45mm 029 jug or a 46mm slug and jug. PM me with what you got and what you want for it. also needing a clutch/sprocket cover for the same saw.
thanks,
Nathan
PS: not much to trade besides cash... oh, and a 029 coil...
hey guys,
I bought a new 45mm slug thinking my old jug would be good and after reassembly I checked compression and I still only have 110psi. I need a good 45mm 029 jug or a 46mm slug and jug. PM me with what you got and what you want for it. also needing a clutch/sprocket cover for the same saw.
thanks,
Nathan
PS: not much to trade besides cash... oh, and a 029 coil...
zogger
Tree Freak
I have a parts 1800 with a bad top end, so I started parting it. If it is the same part number we can do something for it. I'll look at it tomorrow and see if it is still in good enough shape to use.
good deal. thanks. jerry
Hey guys-
I'm looking for a couple things that are a long shot for sure-
1.- real nice screw-cap 044 tank, will pay top dollar for this one
2.- Jonsered 2094/2095 carcass or runner. I'm looking for a full-wrap version and I'd like to find a pretty nice one
or one that could be made nice. This is going to be a custom large-bore hotsaw for an old-time timber faller friend
who is a big Jonsered enthusiast. I can do cash or cash/part trade or whatever. Thanks....
I'm looking for a couple things that are a long shot for sure-
1.- real nice screw-cap 044 tank, will pay top dollar for this one
2.- Jonsered 2094/2095 carcass or runner. I'm looking for a full-wrap version and I'd like to find a pretty nice one
or one that could be made nice. This is going to be a custom large-bore hotsaw for an old-time timber faller friend
who is a big Jonsered enthusiast. I can do cash or cash/part trade or whatever. Thanks....
Saw Dr.
Junk Collector
66's are fairly rare saws. I'd probably look for a 61 or 266 cover if you're just building a runner.
Whats the chances of finding a brake band for a Jonsered 920/930?
Looked like Arrowhead scored a nice 044 tank today....will putz around for a 2094/2095. Highly doubt I can locate one though.
Warped5
WingNut
.... I thinx you want to ask Arrowhead. :msp_thumbup:
