Swap meet...

[cowroy]

I've been to Mike's house several times and he has a lot of big saws and parts and his prices have been very reasonable. He has good stuff too. I still have my eye on his Jonsered 2083 hotsaw.

He's not kidding about the 090 stuff either. There's enough there to almost fill a guy's pickup.

Awesome! Wish I was closer, I hope he unloads some stuff to help with the move. There are very few thing that I hate to do, but moving is one of em.

 

[Stihlofadeal64]

Looking for a nice 029/039 back handle/top cover with a matching filter box. Preferably not one that looks like it came from the black lagoon :hmm3grin2orange:.
I have cash and some trading fodder (not much at this time though). Drop me a pm if you have one that is promising. Thanks!

Bumpity Bump

 

[PogoInTheWoods]

Need a 064 / early 066 FW side case half, or the whole case. Caish and a variety of trading material available.

Also still looking for a 371 trigger/trigger lock assembly.

 

[jockeydeuce]

In need of a rear handle assy and rear mounting bracket for a Stihl 090AV....This is the early AV with the big upper support bar.....I can come up with part #'s if anyone thinks they might have something....Thanks!

 

[TermiteBuffet]

Need a 064 / early 066 FW side case half, or the whole case. Caish and a variety of trading material available.

Also still looking for a 371 trigger/trigger lock assembly.

Pogo I might have a trigger / lock for a 372 will that work?

 

[67L36Driver]

Dammit. That sort of thing (big saw/parts score that's actually within a couple hours drive for me) only comes around when I've spent $$$ elsewhere. Just bought a new/used family car and spent some $$$ on the house....:bang:

Start hiding a little bit in your sock drawer every week.:msp_wink:

 

[epicklein22]

Looking for a flywheel, piston and rings and possibly recoil assembly for a husky 288. I have some parts and certified electrons to trade.

I should have at least a recoil and probably a flywheel. No piston though

Looking for an air filter cover and mounting boss for the single screw style filter.

If anyone can help out please PM.

Thanks,
MP5N

I know I have a cover off a TS510, should be the same correct? Assuming I have the base as well....

 

[jdeere66]

jonsereds m-36 automatic

looking for a switch for a jonsereds m-36 auto
Thanks.

 

[barneyrb]

I need another set of MS660 cases for a customer's saw. I have stuff and green paper for trading fodder.

Bump bump....

 

[struggle]

Looking for a piston for a homelite 8800. Someone has to have one around here they would give up:msp_biggrin:

Have paper with dead presidents on it.

Or if anyone knows where I might be able to find one. One other person here at AS is going to do some checking for one but still want to leave no stone unturned as that might not work out

 

[thomas1]

Looking for a piston for a homelite 8800. Someone has to have one around here they would give up:msp_biggrin:

Have paper with dead presidents on it.

Or if anyone knows where I might be able to find one. One other person here at AS is going to do some checking for one but still want to leave no stone unturned as that might not work out

Did you already check with Joyce?

Or whoever bought out Hawkins Brothers? I can grab their number tomorrow, if you need it. Mr. Hawkins still works there part time, I was told this morning. He was there this morning, but I don't know what his schedule is.

 

[struggle]

Did you already check with Joyce?

Or whoever bought out Hawkins Brothers? I can grab their number tomorrow, if you need it. Mr. Hawkins still works there part time, I was told this morning. He was there this morning, but I don't know what his schedule is.

Not familiar with who you are talking about. Any info would be great

 

[Eccentric]

Start hiding a little bit in your sock drawer every week.:msp_wink:

Where do you think the down payment for the OL's van came from???:msp_rolleyes:

 

[ckelp]

Where do you think the down payment for the OL's van came from???:msp_rolleyes:

Snap


Did the same thing with the (as Randymac put it) the yuppy car

 

[thomas1]

Not familiar with who you are talking about. Any info would be great

Joyce is chainsawlady on here, you can catch her by pm. She was a long time Homelite dealer and still has parts for some stuff. Plus, she is extremely nice and her prices are very good, in my experience.

I have the other number written down at work, I will PM it to you later this morning.

 

[psuiewalsh]

I should have at least a recoil and probably a flywheel. No piston though


I have one member that thinks he has a recoil and another that thinks he has a piston and flywheel. I will let you know if they have what they think they have.

 

[PogoInTheWoods]

Pogo I might have a trigger / lock for a 372 will that work?

Should be the same parts. PM inbound. Thanks.

 

[cnice_37]

Looking for
1)a top handle for a Husky 455 (neighbor dropped a tree on a saw on its 2nd tank of gas :msp_sad: )
2)chain brake assembly for Husky 55

Trade fodder is green and fits in yer wallet

 

[cat-face timber]

Joyce is chainsawlady on here, you can catch her by pm. She was a long time Homelite dealer and still has parts for some stuff. Plus, she is extremely nice and her prices are very good, in my experience.

I have the other number written down at work, I will PM it to you later this morning.

When I have dealt with her, she was very honest and a very fast shipper..

 

[thomas1]

When I have dealt with her, she was very honest and a very fast shipper..

The first time I dealt with her I was looking for a recoil assembly for a Super Wiz 55. She had a new one on the shelf and told me the last price in the book was from 1970 something and was like $30. I thought okay, adjusted for inflation that's going to be double in today's dollars, right?

Nope, her price was the same.

Joyce is good people. :msp_thumbsup: