Making some 044, 064, 066 Dogs. . .

[Metals406]

Want in? They're gonna be 4-point -- laser cut from 3,mm Domex.

Domex is very, very tough stuff! :msp_thumbup:

These will fit: 044/MS440, 064, 066/MS660

The roller catcher hole doesn't line up on the 460, so the outer dog is different because of that.

Because of info in the above quote, I will have to work up some 046/460 dogs as they're different enough to matter on fit-up. Or you can just slot the catcher hole to make it work.

Anyway, shipped to your door they're $24.00 (lower 48) -- I'm not making money, that's the cost plus a Priority Mail box.

Let me know, I'm fix'n to order soon.

Here's what they look like in the hand. (template wise)

 

[Metals406]

Got one fella interested. . . opcorn:

 

[Jacob J.]

I'll take a set...

 

[Metals406]

BTW, thinking of buying myself some new fancy pants roller/catchers for the bottom of mine. . . Figured I'd see if Bailey's would do a deal on a batch. (Stihl 1122 650 7700)

I'm gonna get 4 fer myself, so let me know if you'd want a new one too, and I could throw it in the box with the dogs. I'd just charge cost for them as well.

:msp_smile:

 

[Metals406]

I'll take a set...

Good deal, I'll mark ya down for a set.

 

[Work Saw Collector]

BTW, thinking of buying myself some new fancy pants roller/catchers for the bottom of mine. . . Figured I'd see if Bailey's would do a deal on a batch. (Stihl 1122 650 7700)

I'm gonna get 4 fer myself, so let me know if you'd want a new one too, and I could throw it in the box with the dogs. I'd just charge cost for them as well.

:msp_smile:

I want the roller catcher on mine as well.

 

[redoakneck]

Will they fit a ms660? If so I would like a set with the roller catcher.

 

[Metals406]

Will they fit a ms660? If so I would like a set with the roller catcher.

AFAIK, there isn't a difference, and these will fit just fine.

I'll mark ya down fer a set.

 

[redoakneck]

Thanks Metals!!! I will PM u my e-mail so I can Paypal.

 

[bcorradi]

These should also work on the 046 also without any modifications. You may just want to change the title to 044/MS440, 046/MS460, 064, 066/MS660 to clear up which models they will work on.

 

[Metals406]

These should also work on the 046 also without any modifications. You may just want to change the title to 044/MS440, 046/MS460, 064, 066/MS660 to clear up which models they will work on.

Seems like when my buddy was templating off of 044 dogs, for a 460 -- the holes weren't exactly the same.

You're probably right though Brad, I'll see about amending the title.

 

[bcorradi]

Seems like when my buddy was templating off of 044 dogs, for a 460 -- the holes weren't exactly the same.

You're probably right though Brad, I'll see about amending the title.

Ok. I just looked at the IPL's and the bigger inner spikes for both an 044 and 046 are 1122 664 0506. To my recollection they should work fine on an 046/460, but JJ or someone else may know differently.

 

[mdavlee]

Here's all the part numbers. Pro safety lists two different sets. One for all but the 046/460.

440/460 inner 1122 664 0506
440 outer 1122 664 0501
460 outer 1128 664 0501
660 inner 1122 664 0508
outer 1122 664 0503

 

[Trx250r180]

the roller catcher hole doesn't line up on the 460 ,outer dog is different because of that ,are you going to be making 461 dogs ?,those look like the 4 points i run now ,i like them a lot ,the 461 uses same inner as 460 and 440 outers on all 3 saws are slightly different

 

[Metals406]

Ok. I just looked at the IPL's and the bigger inner spikes for both an 044 and 046 are 1122 664 0506. To my recollection they should work fine on an 046/460, but JJ or someone else may know differently.

Instead of the title, I just amended the first post. :msp_thumbsup:

 

[mdavlee]

We need to get the 441 and 461 part numbers for the spikes on here as well.

 

[Metals406]

the roller catcher hole doesn't line up on the 460 ,outer dog is different because of that ,are you going to be making 461 dogs ?,those look like the 4 points i run now ,i like them a lot ,the 461 uses same inner as 460 and 440 outers on all 3 saws are slightly different

Maybe it was the roller catcher hole I was thinking of, and he slotted the mount holes a bit to make it fit??

I could do 461's -- I'd need a saw to make it work, or a good template of the existing dogs to work with. The hardest part of templating in CAD, is the offset from the front of the inner/outer dogs, to the rear mounting positions. It takes me a while to make sure it's right.

 

[Trx250r180]

here's a 460 outer ,shapes a little different than 440 one View attachment 287908

 

[Metals406]

here's a 460 outer ,shapes a little different than 440 one View attachment 287908

So, these would fit without modification, if a guy doesn't want to use the catcher, correct??

If he does want to use the catcher, a guy would have to modify.

Just want to clarify for the readers.

 

[Trx250r180]

here is a 440 dog sitting on top of the 461 dog ,a lot different View attachment 287910

440 460 461 dog on left ,then 440/660 and 461 on right View attachment 287912