Swap meet...
- Thread starter Four Paws
- Start date
Help Support Arborist Forum:
I need a muffler and the spring assembly that connects the handle to the cylinder, both for an MS361. Have Stihl stuff (026,036,046,ms200,ms361) and green stuff to swap.
Big_Wood
westcoast dweller
in need of a few parts. my 346 oiler quit yesterday 
seems to only oil intermittently even with pickup line and output clear. worm gear is good so i figure it's gotta be the oiler. only used 1/16 of the oil tank to one tank of fuel. another part which wouldn't be the end of the world if i didn't get cause it still works is the clutch for the 346. mine works but rattles like crazy. sounds like it's got a blown rod bearing. i replaced the springs on it which tightened it up but still noisy. seems the carrier and shoe slots are badly worn. i've got some stuff to trade.
seems to only oil intermittently even with pickup line and output clear. worm gear is good so i figure it's gotta be the oiler. only used 1/16 of the oil tank to one tank of fuel. another part which wouldn't be the end of the world if i didn't get cause it still works is the clutch for the 346. mine works but rattles like crazy. sounds like it's got a blown rod bearing. i replaced the springs on it which tightened it up but still noisy. seems the carrier and shoe slots are badly worn. i've got some stuff to trade.
nmurph
ArboristSite.com Sponsor
- Joined
- Nov 26, 2007
- Messages
- 16,162
- Reaction score
- 7,166
in need of a few parts. my 346 oiler quit yesterday
I know a guy...
Big_Wood
westcoast dweller
PM sent
in need of a few parts. my 346 oiler quit yesterday
I've got some of those parts as well...
Big_Wood
westcoast dweller
thanks for your generosity J.J. neal has me covered on what i need. i owe you guys both.
Jordan3605
ArboristSite Operative
Pro Mac 10-10.
Good Compression. Good Condition. Missing Plug Wire,Clutch Cover,Choke Linkage and chunk missing out of corner of Air Filter Cover (seen in pic)
Good Compression. Good Condition. Missing Plug Wire,Clutch Cover,Choke Linkage and chunk missing out of corner of Air Filter Cover (seen in pic)
Last edited:
Jordan3605
ArboristSite Operative
Pro Mac 10-10. Complete. Runs, small chip missing from Air filter Cover.
Last edited:
and your point is??????Pro Mac 10-10.
Good Compression. Good Condition. Missing Plug Wire,Clutch Cover,Choke Linkage and chunk missing out of corner of Air Filter Cover (seen in pic)
ditto???Pro Mac 10-10. Complete. Runs, small chip missing from Air filter Cover.
Jordan3605
ArboristSite Operative
Mac 10-10 . Right Hand Recoil. Started on direct fuel.
Last edited:
Jordan3605
ArboristSite Operative
need a parts 026 pro for clutch side parts.
also just looking to get these things to a good home
also just looking to get these things to a good home
Jordan3605
ArboristSite Operative
just offering these to an interested party thats all. thanks
Jordan3605
ArboristSite Operative
ditto
cool. its guys like you that make it hard for guys like me to keep my addiction under control. good on ya. Merry Christmas to you and your loved ones.
kgip2k
ArboristSite Operative
Pro Mac 10-10. Complete. Runs, small chip missing from Air filter Cover.
Message sent
Have you found a filter cover yet? I have one which is OK but the fastening screw is separate but it works. Maybe you could swap your own thumb screw and keeper. The two rear corners are chipped but I don't think it would be a problem. Electronic coil or points? I have a points coil which didn't work for me so swapped it for an electronic one from an other saw. So I have coil, points box, and flywheel available. I'm not that good at checking these things so it maybe OK. Any of it is yours for postage.I'm working on a Homelite Super XL Automatic, for the pastor of my wife's home town. It needs a coil and filter cover. Anyone have one they would part with? Please PM me with a price. Thanks!
Regards,
Lee
Last edited:
I was working on getting him a cover but I am really not having any luck finding it.
MS460WOODCHUCK
Addicted to ArboristSite
I find myself needing a couple of check valves for the oilers to some micro poulans. This is the little nut behind the clutch. Pm me is you have any to let go.
Similar threads
