you speak for husqvarna or stihl splitter?
Want to Buy Case Splitter for Stihl
- Thread starter blueberrymuzik
- Start date
Help Support Arborist Forum:
Oldsawnut
Addicted to ArboristSite
I bought my Husqvarna splitter for 60 at my local husky dealer in Chehalis Wa that also ships..... I have used it on many Stihl saws.
Yes can open many stihls models , good tool
juttree
ArboristSite Guru
Definitive Dave is a great guy to deal with.
StihlNAlberta
ArboristSite Member
92 bucks on ebay......
http://www.ebay.com/itm/Stihl-CRANK...120?pt=LH_DefaultDomain_0&hash=item4629a5f680
http://www.ebay.com/itm/Stihl-CRANK...120?pt=LH_DefaultDomain_0&hash=item4629a5f680
This is the husqvarna splitter not the stihl , 92+ 62 shiping = 154
Stihlofadeal64
Addicted to ArboristSite
It can be made to use on some Stihl cases, the "forks" need to be spread apart or bent so that they can access the case around the crank and not ON the crank.
ive thought about figuring out how to make the forks "adjustable" to make them work. But I'm a "thinker" not a welder.....
thats some ugly welding right there...I know you didn't do that !!!
Real easy to copy if you had on in front of you. Since I have a friend with a huge welding shop at my disposal. Get one and more can be made.
half_full
ArboristSite Guru
It can be made to use on some Stihl cases, the "forks" need to be spread apart or bent so that they can access the case around the crank and not ON the crank.
ive thought about figuring out how to make the forks "adjustable" to make them work. But I'm a "thinker" not a welder.....
I thought about the adjustable forks too as mine is home made and thicker steel than the manufacturers tool.
Drill a hole through one fork high enough not to interfere with the case of the saw when the tool is in place.
Weld a nut so a bolt can go though the hole. Tighten the bolt to spread the forks. The welded nut holds pressure on one fork while the bolt pushes on the other...
Can you post a pic of where it mounts on the engine?This is the stihl splitter open and close the case, the husqvarna only open
The stihl dont do this as they dont do cylinders, pistons and many more, they dont care for the finishing just for the functionality, any way, here you look some long nuts, theese are for close all the saws, and many others machines, also the center bolt is have right threads and half left, think how the clutch screw and you understand why this tool open and close,thats some ugly welding right there...I know you didn't do that !!!
And with some modifications this tool can open and close all saws, no matter if husky, dolmar , etc and without moving the piston.
my opinion is the husky spliter is a good bull.............. and have two splitters for big models and for small so if you have 346xp and buy the wrong splitter ................... and can not open the 550xp 560,562 and i think the 576.
just a minute to put the splitter on a saw and you have how to open and how to close.
Which side ?
Never mind I see it in the repair manual it mounts to the two bar mounts and presses the crank snout right?
