My "new" 064.
Chainsaw photography
- Thread starter mweba
- Start date
Help Support Arborist Forum:
Rescue1
ArboristSite Member
This is proof that a good, crazy priced lens is worth its weight. What an awesome picture. BTW What were your settings on the camera? I'm assuming your aperture was set low due to the perfect fuzzed background..
This is proof that a good, crazy priced lens is worth its weight. What an awesome picture. BTW What were your settings on the camera? I'm assuming your aperture was set low due to the perfect fuzzed background..
That is indeed a super sharp photo, with beautiful bocah as well!
MacLaren
Addicted to ArboristSite
This is proof that a good, crazy priced lens is worth its weight. What an awesome picture. BTW What were your settings on the camera? I'm assuming your aperture was set low due to the perfect fuzzed background..
Thats a professional shot IMO. Good job!
Rescue1
ArboristSite Member
Here are a few wood splitting pics done with an Olympus E-450. Not a bad camera, but I don't like the noise the "four thirds" lens system gives me, especially at night..
ChainsawmanXX
Addicted to ArboristSite
here are a few wood splitting pics done with an olympus e-450. Not a bad camera, but i don't like the noise the "four thirds" lens system gives me, especially at night..
rep!!
Stihlman441
Addicted to ArboristSite
Dont know how you blokes put up with that cold looking snow ? not for me thanks..............
This was a just for fun pic.:msp_smile:
Gregg,
Gregg,
Tzed250
Addicted to ArboristSite
This is proof that a good, crazy priced lens is worth its weight. What an awesome picture. BTW What were your settings on the camera? I'm assuming your aperture was set low due to the perfect fuzzed background..
Camera Info
Device: Nikon D2Xs
Lens: 80-200mm F/2.8D
Focal Length: 185mm
Focus Mode: AF-S
AF-Area Mode: Single
VR:
AF Fine Tune:
Exposure
Aperture: F/2.8
Shutter Speed: 1/500s
Exposure Mode: Aperture Priority
Exposure Comp.: 0EV
Exposure Tuning:
Metering: Matrix
ISO Sensitivity: ISO 280
L7 by zweitakt250, on Flickr
Nice lenses are nice...
Thanks a lot!!!
.
STIHL880
ArboristSite Operative
Roma, i don't get it, a STIHL sign over a DOLMAR saw. hmm, I want that sign, Nice Mar btw.
EXCALIBER
ArboristSite Guru
:agree2:
parrisw
Tree Freak
How to adapt a different piston with different pin sizes!
That wouldn't happen to be for a 288 piston would it?
parrisw
Tree Freak
Nope, but it could be!! Haven't had the time yet to try that 288 swap. Those bushings are some I did for another member for a top end swap project.
parrisw
Tree Freak
I take it, your thinking 288 piston in a BB7900? I heard its been done, anybody know how it runs?
That's something I'd like to try, but have not seen one.
Similar threads
